Greetings all,
After my original DMX question (about the 4 LED PAR lights I purchased not working in master / slave mode) from a few months back, I've had to purchase another 4 different lights for my side-project. These stated they were master-slave compatible, so I ordered some new DMX cables.
Naturally, they don't work in master-slave mode. Boooo.
So, I've ordered an Obey 10 DMX controller to try and get some synchronicity between the lights. Now, my question is - is there any kind of software to help me program the lights / DMX sequences etc.? Ideally on iPad, but PC / Mac is fine too. If not, I'll just have to muddle my way through setting it up direct in the DMX controller.
It won't be anything too fancy with triggers etc., just basically to ensure the two at the front are in sync, and the two at the back of the stage are also matched.
Comments
1. Set the master light to a solid colour
2. Turned on the slave unit, set the mode to D001(as per manual for slave mode)
3. Connected DMX OUT of master to DMX in of slave
4. Nothing happened
Tried all kinds of configurations - turning them on in different orders, different cables, connecting before and after powered on etc.
These are the lights - https://www.amazon.co.uk/gp/product/B01MXVKWAV/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
PS anyone want the obey3?
Followed the manual and YouTube guides, and nothing.
Very annoying - looks like the lights are going back....!