Does anyone have any recommendations for terminal blocks, barrier strips or things like that for wiring up guitars? I've used europe style ones before, but they're a bit chunky which makes things a bit cramped (think 8mm pitch is the smallest, and also the bodies are quite large). All the smaller r/c or PCB header ones seem to come in one half screw, one half PCB types, I suppose the pots could be directly soldered and use the screw terminal side for the pickups, but any alternatives out there? (Or just use the same side for all connections?)
Comments
I imagine that's due to it predominantly being used for domestic electrical wiring etc.
Farnell/Rapid might be worth a crack (minimum order value etc. will be applicable though).
I've got it bookmarked for a go next time I'm doing a pickguard, just life keeps getting in the way.
So a bit more compact, I also found it was the edges on the eurostyle stuff that caused problems, making it a bit more difficult to pack them in. Fitting one connection in is fine, once you get to two tapped pickups or three singles though you have 6 of them to get in there and it depends how much space is available. Would have to check what pitch I used last time though.