Behold my massive board of pedals

danlpt

Stripped back to a simple setup for my new band.

[img]http://i.imgur.com/dcJdsAz.jpg[/img]

mattdavis

Finally settled on SDD 3000 as the multidelay for me, and the DD3 will have to go on a mini board. Loving the new Lazy J cruiser..

TimmyO

mattdavis said:

Finally settled on SDD 3000 as the multidelay for me, and the DD3 will have to go on a mini board. Loving the new Lazy J cruiser..

https://flic.kr/p/UwABD7

What's the OD-3 like? 

mattdavis

TimmyO said:

mattdavis said:

Finally settled on SDD 3000 as the multidelay for me, and the DD3 will have to go on a mini board. Loving the new Lazy J cruiser..

https://flic.kr/p/UwABD7

What's the OD-3 like? 

It was my first pedal - and having tried and moved on a ts 808, SL drive, angry Charlie and a prince of tone, it's still here!
It's not as refined as the Cruiser for lower gain overdrive, with less tonal options, but it's fantastic to push my mildly crunchy Marshall into guns n roses kind of territory. Love it 

Legionreturns

Ok so I'm a relative noob, and I was getting by ok with just the ME 80, but I recently decided to put together a few other options to leave channels open on the Boss, and to improve pedal order etc. 

This has been thrown together pretty cheaply and comprises Pitchblack Tuner, Tone city Sweet Cream (Honey clone) and Model E amp sim with separate boost switch, quattro delay which is really good for the size / price and  generic 10 minute looper with some effects. It's the Thomman version but identical to many others. Only thing missing is a gate, if I can fit one on but I think it's needed. I've got some lower profile patch leads and L shaped power daisy chain on the way so that will make things a bit neater, and I will then get rid of the messy cable monstrosity! 

So... any advice on a relatively cheap / small gate?

Any observations / tips for tweeks? I'm not gigging, I'm a noob, but I do play with mates and intend to start doing some open mic type stuff in another six months or so.
It's currently all going in to a Fender Mustang ii v2, which is ok for playing with mates but long term I'm looking at something more pokey and valve based.

jamiexsilver

This is my board, eventually I'll replace the midi moose with a es5 or 8 but for now it'll do. I've modded the midi moose to include 3 way aux switch at the top that controls the H9 so I can access all the presets and control tap tempo, bypass and whatever I set the third switch to do. 

Winny_Pooh

^ one drive and alot of verb there

jamiexsilver

Winny_Pooh said:

^ one drive and alot of verb there

No such thing as too much reverb.

BintyTwanger77

jamiexsilver said:

Winny_Pooh said:

^ one drive and alot of verb there

No such thing as too much reverb.

Preach. I have a Big Sky and an H9.

Drew_TNBD

jamiexsilver said:

This is my board, eventually I'll replace the midi moose with a es5 or 8 but for now it'll do. I've modded the midi moose to include 3 way aux switch at the top that controls the H9 so I can access all the presets and control tap tempo, bypass and whatever I set the third switch to do. 

Are you using the Moose for the H9 and the DD500, or just the H9?

jamiexsilver

Drew_TNBD said:

jamiexsilver said:

This is my board, eventually I'll replace the midi moose with a es5 or 8 but for now it'll do. I've modded the midi moose to include 3 way aux switch at the top that controls the H9 so I can access all the presets and control tap tempo, bypass and whatever I set the third switch to do. 

Are you using the Moose for the H9 and the DD500, or just the H9?

Just the H9 at the minute, I only got the DD500  last week so I've not had much time to mess about with it yet, but the plan is to use it too.

builttospill

MrSwanson said:

builttospill said:

Current set up!

https://imgur.com/gallery/86M50

Dibs on the Dr S

It's a fab pedal! the clean boost is also very useful!

gitapik

My two boards. The smaller one started as an orphan board (that BCB-6 served me for many a gig) until I got the Timmy and XTS modded GE-7. They do a lot for the sound:

https://s25.postimg.org/6o9e85uhr/IMG_3653.jpg

https://s25.postimg.org/y927zfc0v/IMG_3178.jpg

https://s25.postimg.org/wxugqygf3/IMG_4738.jpg

samzadgan

so i've been quietly working away on a new (secondary board) simple board for a project...straight up doom metal. Finished it a week ago...loving all the tones i get from it.




Signal chain is:
Guitar -> Kill Switch -> The Wizard -> Apollo Phaser -> Maxon Delay -> Ghost Echo -> Tuner

DesVegas

What a lovely 2nd board Sam

Winny_Pooh

gitapik said:

My two boards. The smaller one started as an orphan board (that BCB-6 served me for many a gig) until I got the Timmy and XTS modded GE-7. They do a lot for the sound:

https://s25.postimg.org/6o9e85uhr/IMG_3653.jpg

https://s25.postimg.org/y927zfc0v/IMG_3178.jpg

https://s25.postimg.org/wxugqygf3/IMG_4738.jpg

Nice

gitapik

Winny_Pooh said:

gitapik said:

My two boards. The smaller one started as an orphan board (that BCB-6 served me for many a gig) until I got the Timmy and XTS modded GE-7. They do a lot for the sound:

https://s25.postimg.org/6o9e85uhr/IMG_3653.jpg

https://s25.postimg.org/y927zfc0v/IMG_3178.jpg

https://s25.postimg.org/wxugqygf3/IMG_4738.jpg

Nice

Thanks. I love both. 

vasselmeyer

jamiexsilver said:
Just the H9 at the minute, I only got the DD500  last week so I've not had much time to mess about with it yet, but the plan is to use it too.

@jamiexsilver I have a Midi Moose which I use with a Zoom G3 as a backup rig in case my ES-8 pedal board or my amp go down at a gig. The Midi Moose only sends on one channel if I recall correctly. At default it uses channel 1 but you can change it  by pressing the UP and DOWN button simultaneously. You might find a clash  if you set both the H9 and the DD500 on the same channel. You might be  able to do some kind of addition midi command from one of the devices if you select a particular patch, e.g. if patch 10 on the H9 is selected it sends of a PC change on a different channel to the DD500.

Anyway, I  think you might need to upgrade to an ES-5 or ES-8 fairly soon to take advantage of the two midi devices. On my board I have a Mobius and a Source Audio Nemesis, on different midi channels. I'd be amazed if I could get them both to work on the same channel.

Placidcasual79

dogload said:

My first update in almost a year (!) Adding a germanium Fuzz Face Mini and a little silicon Fuzz Face clone in front of the CS-1

How d'you get on with your Freeze @dogload? What do you use it for?

samzadgan

DesVegas said:

What a lovely 2nd board Sam

Cheers @DesVegas ;

its suprising how many sounds i can get out of such a simple board...sometime it makes me question my big board...