Behold my massive board of pedals

What's Hot
1178179181183184392

Comments

  • GassageGassage Frets: 30826
    frank1985 said:
    My synth board, soz for the crap pics. Been testing it out with a bunch of volcas but will eventually hook up a Virus once I have a bigger room. That's a patchbay in the middle btw...saves me a lot of hassle. One more moogerfooger now courtesy of @merlin and this will be fully sentient. 

    https://s1.postimg.org/pxh8ap57z/IMG_0116.jpg

    https://s24.postimg.org/tmn3wq8ed/IMG_0119.jpg

    Are those those new Danish high end soap dispensers?

    *An Official Foo-Approved guitarist since Sept 2023.

    1reaction image LOL 1reaction image Wow! 0reaction image Wisdom
  • smudge_ladsmudge_lad Frets: 653
    Grunfeld said:
    Last Saturday's incarnation. Pretty happy with this, although I'll re-mount my wireless underneath so I've got space for something else...

    http://i86.photobucket.com/albums/k100/keir_smith/415E25BA-FFC9-4359-B762-72B0D84229AE.jpg
    @smudge_lad ; I've got the same board and wireless.  Do you reckon there's enough clearance underneath?  I remember wanting to stick the G30 under but wasn't convinced it wouldn't get squashed on some stages.
    @GrunfeldIt definitely does fit underneath, I've had it under there before:

    http://i86.photobucket.com/albums/k100/keir_smith/C292B0C0-1C2B-422E-BD33-7A4A24850EBE.jpg

    This was about the only way way to make it work though without raising the board/feet
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
  • GrunfeldGrunfeld Frets: 4027

    This was about the only way way to make it work though without raising the board/feet
    Cheers @smudge_lad ; -- I realised afterwards my board is smaller -- a Metro 24.  The clearance is frustratingly on the wrong side of not enough. 
    I don't want to drill the feet so I will have a go at super gluing some washers or something to the existing feet.  I literally only need about 1mm to make it work.
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
  • UnorthodoxUnorthodox Frets: 395
    edited July 2017
    Jack of all trades, master of none?



    Added the Sub 'n up, next is a Mimiq.



    0reaction image LOL 1reaction image Wow! 0reaction image Wisdom
  • timmysofttimmysoft Frets: 1962
    I think i've got it how i want it now! (famous last words)

     Mini CryBaby -> OCD v1.7 -> TCE Flashback with a Bright Onion switch for the channel on the 2525c

    I'm trying to keep it as simple as possible for my new project, so i've ditched the whacky effects and stuck to what i know. Its all powered by a Cioks Adam which i mounted underneath, i also have the Xotic Voltage Doubler running the OCD at 18v.


    0reaction image LOL 1reaction image Wow! 0reaction image Wisdom
  • paulphoenixpaulphoenix Frets: 141
    edited July 2017
    Pedalboard V2.11.9 


    More of a reshuffle really - due to newly acquired Guv'nor and freshly (DIY) modded RC-1.


    Guitar > Cry Baby Mini > Kingslayer OD > The Guv'nor > Gain Changer > Timmy > RC-1 > MS-100 > Amp






    0reaction image LOL 1reaction image Wow! 0reaction image Wisdom
  • Pedalboard V2.11.9 


    More of a reshuffle really - due to newly acquired Guv'nor and freshly (DIY) modded RC-1.


    Guitar > Cry Baby Mini > Kingslayer OD > The Guv'nor > Gain Changer > Timmy > RC-1 > MS-100 > Amp







    Whoa, what's with the switch on the looper? 
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
  • UnclePsychosisUnclePsychosis Frets: 12881
    Pedalboard V2.11.9 


    More of a reshuffle really - due to newly acquired Guv'nor and freshly (DIY) modded RC-1.


    Guitar > Cry Baby Mini > Kingslayer OD > The Guv'nor > Gain Changer > Timmy > RC-1 > MS-100 > Amp







    Whoa, what's with the switch on the looper? 
    -the rc-1 let's you connect an external footswitch for stop/undo/redo functionality. I'd guess that this is just a hardwired one. I've see  the same thing done with the external tap-tempo on the DD7 for example. 
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
  • GavRichListGavRichList Frets: 7143
    My downsized board build is all, done*. Lots of planning, but love how it's turned out. 

    Just waiting for my Morningstar MC6 for the gap, then it'll be a world of awesome. 

    https://i.imgur.com/9qki3ZN.jpg

    https://i.imgur.com/pMV2FXm.jpg

    https://i.imgur.com/s2vbKa0.png

    https://i.imgur.com/W05uGAN.png

    Cannot wait for the MC6. @ThorpyFX making dreams come true :D
    0reaction image LOL 5reaction image Wow! 0reaction image Wisdom
  • ThorpyFXThorpyFX Frets: 6090
    tFB Trader
    My downsized board build is all, done*. Lots of planning, but love how it's turned out. 

    Just waiting for my Morningstar MC6 for the gap, then it'll be a world of awesome. 

    https://i.imgur.com/9qki3ZN.jpg

    https://i.imgur.com/pMV2FXm.jpg

    https://i.imgur.com/s2vbKa0.png

    https://i.imgur.com/W05uGAN.png

    Cannot wait for the MC6. @ThorpyFX making dreams come true :D
    I do try! 
    Adrian Thorpe MBE | Owner of ThorpyFx Ltd | Email: thorpy@thorpyfx.com | Twitter: @ThorpyFx | Facebook: ThorpyFx Ltd | Website: www.thorpyfx.com
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
  • professorbenprofessorben Frets: 5105
    Really love this mini-board, very versatile. The El Cap is a recent acquisition and it is just the most beautiful-sounding pedal. I'll need to set up the H9 for pre/post-routing but I'm taking this to the next rehearsal. 

    https://imgur.com/gallery/JhSWI
    Hey dude, how did you get on with the pre/post? I'm using like that but I'm finding it's a bit noisier? A high pitch sound which goes away in standard. 

    Might give Wet/Dry a try too. 
    " Why does it smell of bum?" Mrs Professorben.
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
  • paulphoenixpaulphoenix Frets: 141
    edited July 2017



    Whoa, what's with the switch on the looper? 
    I'd seen it done to both the RC-2&3 - it's a stop/clear button hard wired to the aux input jack and saves me having a separate footswitch on the board so no more "double tap" to stop the loop as well as being a silent "loop clearing" function. 

    It does look kinda funky until you get used to it but it was definitely a case of function over form on this one for sure. 
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
  • murraypopsmurraypops Frets: 56
    edited July 2017
    My modest board! Might nix the freeze soon but otherwise a lot of fun.
    http://i1164.photobucket.com/albums/q565/Murraypops/Mobile Uploads/cZgPwY1_zps66whwzdn.jpg
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
  • BintyTwanger77BintyTwanger77 Frets: 2208
    edited July 2017
    Really love this mini-board, very versatile. The El Cap is a recent acquisition and it is just the most beautiful-sounding pedal. I'll need to set up the H9 for pre/post-routing but I'm taking this to the next rehearsal. 

    https://imgur.com/gallery/JhSWI
    Hey dude, how did you get on with the pre/post? I'm using like that but I'm finding it's a bit noisier? A high pitch sound which goes away in standard. 

    Might give Wet/Dry a try too. 
    Not needing to use pre/post at the moment. I'm off the mini-board idea for now, thanks to finances, losing paid work, etc.
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
  • WazmeisterWazmeister Frets: 9446
    @GavRichList - I just missed out on the current batch of Morning Star mate... !

    James is gonna let me know when the next lot are in. Looks mighty...
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
  • HeartfeltdawnHeartfeltdawn Frets: 22096
    Well...

    http://i.imgur.com/ieyAITr.jpg

    I've had it since Saturday and only now have I had a chance to get any time with it (a whole hour) courtesy of working like a mad eejit, 

    Thus far I've only dialled in the Timmy drive and the CE-2 chorus going into S-Gear on the PC. Very impressed. 



    0reaction image LOL 2reaction image Wow! 0reaction image Wisdom



  • Whoa, what's with the switch on the looper? 
    I'd seen it done to both the RC-2&3 - it's a stop/clear button hard wired to the aux input jack and saves me having a separate footswitch on the board so no more "double tap" to stop the loop as well as being a silent "loop clearing" function. 

    It does look kinda funky until you get used to it but it was definitely a case of function over form on this one for sure. 

    That's really clever, I like it. 
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
  • My downsized board build is all, done*. Lots of planning, but love how it's turned out. 

    Just waiting for my Morningstar MC6 for the gap, then it'll be a world of awesome. 

    https://i.imgur.com/9qki3ZN.jpg

    https://i.imgur.com/pMV2FXm.jpg

    https://i.imgur.com/s2vbKa0.png

    https://i.imgur.com/W05uGAN.png

    Cannot wait for the MC6. @ThorpyFX making dreams come true :D
    what happened to the Moog?
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
  • GavRichListGavRichList Frets: 7143
    My downsized board build is all, done*. Lots of planning, but love how it's turned out. 

    Just waiting for my Morningstar MC6 for the gap, then it'll be a world of awesome. 

    https://i.imgur.com/9qki3ZN.jpg

    https://i.imgur.com/pMV2FXm.jpg

    https://i.imgur.com/s2vbKa0.png

    https://i.imgur.com/W05uGAN.png

    Cannot wait for the MC6. @ThorpyFX making dreams come true :D
    what happened to the Moog?
    Our singer managed to drop a can of beer on it. It's being serviced now and is going to be fine thankfully, but it's given me the fear so it's not going back on my board; it'll be reserved for use at home / studio / with the synths. When I searched completed listings on eBay for them to estimate the cost of replacing it whilst fearing the worst, it very quickly became apparent that replacing it isn't really a viable option! They're selling reasonably consistently around the £1000 mark now, so I bought a Timeline for live! 
    0reaction image LOL 0reaction image Wow! 2reaction image Wisdom
  • guitarfishbayguitarfishbay Frets: 7953
    Well...

    http://i.imgur.com/ieyAITr.jpg

    I've had it since Saturday and only now have I had a chance to get any time with it (a whole hour) courtesy of working like a mad eejit, 

    Thus far I've only dialled in the Timmy drive and the CE-2 chorus going into S-Gear on the PC. Very impressed. 
    Very cool. I'll be interested to read a further review when you've used it more.

    Are you using the PC editor or the GUI on the unit?

    I particularly like the muff model - the way you can sweep the mid frequency along with all the other options make it very usable, I prefer it to the real (EHX) muffs I've had. 

    The reverbs are very tasty too.

    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
Sign In or Register to comment.