What will Fit.... Update yes ! Or close enough!

maltingsaudio

Trying to figure out my pedalboard which I bought from @jonnyscaramanga a year ago. The idea was to have the amp remote1 and a boss ME 50 on it but that didn’t fit, so the brief is I need a tuner wah/volume and fx unit to go on it, I also have a line6 MM4 which doesn’t fit either! Now ideally don’t want anything programmable which is why the ME50 was ideal. If Boss did the ME50 without the distortion bit thus saving about 5 inches on the board that would be ideal

Open to any ideas board plus dimensions here sorry don’t seem to be able to embed it

https://imgur.com/gallery/KTngm4I

AntonHunter

https://www.pedalplayground.com/ might be helpful. You can certainly spend hours planning...

rossyamaha

AntonHunter said:

https://www.pedalplayground.com/ might be helpful. You can certainly spend hours planning...

This but be careful. It can cost you money and you WILL lose hours of your life. ;-)

AntonHunter

rossyamaha said:

AntonHunter said:

https://www.pedalplayground.com/ might be helpful. You can certainly spend hours planning...

This but be careful. It can cost you money and you WILL lose hours of your life. ;-)

Truth. 

maltingsaudio

Thanks @rossyamaha and @AntonHunter  for that a genuine time thief! I am looking for recommendations as well, think the Mooer tuner and Morley wah volume are on the list but stuck for a combined twin pedal chorus delay? Think Roland boss did one once?

gatheredinsong

If you need a chorus and delay in one box, Truetone /Visual Sound H2O springs to mind.
Latest version: https://truetone.com/v3-h2o/

joetele

gatheredinsong said:

If you need a chorus and delay in one box, Truetone /Visual Sound H2O springs to mind.
Latest version: https://truetone.com/v3-h2o/

Seconded. Cracking vibrato too. 

joetele

Also, Earthquaker Data Corrupter would be a perfect fit there 

AntonHunter

joetele said:

Also, Earthquaker Data Corrupter would be a perfect fit there 

I feel like you're laying the ground work for moving yours on... ;-)

maltingsaudio

AntonHunter said:

joetele said:

Also, Earthquaker Data Corrupter would be a perfect fit there 

I feel like you're laying the ground work for moving yours on... ;-)

Earth Quaker looks cool but single channel, Trutone H20 really floating my boat and will fit on the top rack but how big is the psu? If it’s anything like the mm4 one need another box just to house it!

gatheredinsong

No idea about the psu sorry, just know they are well respected pedals and seem to offer a good solution. Hope whatever you go for works out. 

maltingsaudio

Finished ish ! Just got to Velcro it all down and get the power supplies under the top shelf. The psu is electro harmonix 200 ma jobbie which is being presented with 166ma from all the pedals, I do have a line 6 one which is 2000ma which I may put in for headroom. The only slight issue is have to unplug the jacks in the amp1 to close the case... hey ho. Ps thanks to @jimkehoe for the hottone wah fuzz!
https://imgur.com/gallery/i9cjYVm