FS: Marshall Vintage and Heritage speakers 8-ohm, TSL122 combo cabinet

ICBM

Updating a very old post!

Downsizing my old workshop so I no longer need my test cabinet - it used to be a TSL122.

Marshall TSL100/122 footswitch - sold.

Other parts - ask! Transformers, main PCB and reverb tank gone - most other internal chassis parts still available. 

Combo cabinet -

It's in pretty good condition - just a few minor nicks in the vinyl, no damage to the grille, but is missing the middle (solid) back panel. The top and bottom back grilles, handles, feet, corner protectors and logo are all in good condition apart from a couple of minor scratches on one of the end handles. It would make a perfect job of tidying up a tatty example or you could use it for some other project. 

(Pics lost due to Imgur blocking the UK - more at bottom.)

£50 inc shipping.

See below for speakers.

ICBM

.

ICBM

Footswitch - fitted with an upgraded cable, and a nice RS metal DIN plug. So it should now be a bit more reliable than they usually are. I've also changed the LEDs so they match the amp, which I thought was a bit of an oversight from Marshall! It has a few minor nicks and scratches but is in pretty good condition really.

They're £70 new for one with the crap cable.

£40 inc postage.

Sold.

ICBM

.

ICBM

.

ICBM

.

ICBM

.

ICBM

.

gama

Pmd re footswitch

ICBM

Updating a very old post.

Two Marshall Celestion custom model speakers - G12 Vintage, basically a slightly differently-voiced V30, and G12 Heritage, which slightly confusingly is not either a G12-65 Heritage or a G12H-30 Heritage, but as far as I can find out is based on the old G12M-70. Both are 8 ohm, 70W.

Both in pretty good condition with a few minor marks on the labels due to having been in an open-back cabinet, and some solder on the terminals (although currently with push-connectors) -



£75 each or £125 for both, inc shipping.

TSL122 combo cabinet -



It's in pretty good condition - just a few minor nicks in the vinyl, no damage to the grille, but is missing the middle (solid) back panel. The top and bottom back grilles, handles, feet, corner protectors and logo are all in good condition apart from a couple of minor scratches on one of the end handles. It would make a perfect job of tidying up a tatty example or you could use it for some other project.

£50 inc shipping, or I'll do the whole lot for £150.


(NB for mods! No actual content deleted above, I just took out some bumps and parts list updates.)

ICBM

Bump - open to offers!