It looks like you're new here. If you want to get involved, click one of these buttons!
Subscribe to our Patreon, and get image uploads with no ads on the site!
Left channel is the JCA50H, right is the JCA22H (mixed 70% each way). Amps are both going into a dummy load (Randomhandclaps' homebrew one for the JCA50H, AMT Powereater for the JCA22H), then fed into the Eventide Time Factor after that and from there into the interface. Cab emulation is done with Two Notes Wall of Sound III, using the Buddha 2x12" (a dynamic and a condenser on each).
First clip: crunch channel on both amps, no effects
Second clip: crunch channel on both amps with the TC Mimiq engaged (one "guitar" through each amp)
Third clip: crunch channel on both amps, guitar volume rolled down a bit, stereo delays from Eventide Time Factor
Fourth clip: crunch channel on both amps with the TC Mimiq engaged (one "guitar" through each amp), guitar volume rolled down a bit, stereo delays from Eventide Time Factor
There's a bit of a glitch at the end of the first clip - it's not in my source files or the rendered version, so I think Soundcloud's had a bit of a barf on it.
These clips are as-is, no processing at all aside from the cab emulation. You'll note that the Mimiq ones are quieter...that appears to be a natural consequence, possibly because the signals are different and I'm not hard-panning the channels. I'll experiment with that when I've got a bit more time.
Base theme by DesignModo & ported to Powered by Vanilla by Chris Ireland, modified by the "theFB" team.
Comments
Glad to see my old amp is being used as intended. The Mimiq seems to do the job admirably.
What guitar are you using?
Effects settings here:
I used those settings on the Mimiq, and The Juicer was also engaged (forgot to mention that part). It doesn't really add much gain, but it sort of livens up the sound a fair bit. That's quite important, because I'm getting a bit of signal loss somewhere before the amps, and that brings it all back and then some.
The Tele is rather nice too, even with Banjo strings on it.......
I haven't tried the Mimiq after the preamp (ie after distortion), but there's a good chance it might work. You could, therefore, split the signal after your GT-100 out to two power amps if it works.
Where is your Mimiq placed in the chain? Input or effects loop?
I'll try it in the loop at the weekend if I get time.