It looks like you're new here. If you want to get involved, click one of these buttons!
Subscribe to our Patreon, and get image uploads with no ads on the site!
HarrySeven - Intangible Asset Appraiser & Wrecker of Civilisation. Searching for weird guitars - so you don't have to.
Forum feedback thread. | G&B interview #1 & #2 | https://www.instagram.com/_harry_seven_/
Base theme by DesignModo & ported to Powered by Vanilla by Chris Ireland, modified by the "theFB" team.
Comments
Q2 - What is the thread pitch of the MIC inserts?
Bridge = M6
Those are the bolts which I used to extract/attempted to extract both sets of inserts.
HarrySeven - Intangible Asset Appraiser & Wrecker of Civilisation. Searching for weird guitars - so you don't have to.
Forum feedback thread. | G&B interview #1 & #2 | https://www.instagram.com/_harry_seven_/
Yes, I did thanks.
I left the inserts in and fabricated 2 x M6 studs (by the simple technique of decapitating two 6mm bolts and tidying up the thread).
I then screwed them in (locked two nuts together in opposing directions to give some traction) and used washers as shims (to offer a degree of height adjustment) for a 6mm T-o-M.
It sounds worse than it looks - pics here:
http://www.thefretboard.co.uk/discussion/108580/project#latest
Cheers!
HarrySeven - Intangible Asset Appraiser & Wrecker of Civilisation. Searching for weird guitars - so you don't have to.
Forum feedback thread. | G&B interview #1 & #2 | https://www.instagram.com/_harry_seven_/