It looks like you're new here. If you want to get involved, click one of these buttons!
Subscribe to our Patreon, and get image uploads with no ads on the site!
Base theme by DesignModo & ported to Powered by Vanilla by Chris Ireland, modified by the "theFB" team.
Comments
Vintage fuzz faces don't like buffers.
I think it's more subtle than that - it could be if you have the buffers on. But they can also be introduced by the pre/post gain circuits - so if you're using those, they have a buffer.
I've ditched my G2, mainly because of size/weight (when combined with pedals), plus I love the Fractal AX8 so much, but one of the nails in the coffin for me was the input impedance of the G2.
Most amps are (I believe) around 1Mohm, the G2 is 2.2MOhm, on most of my guitars I didn't notice this - but I have an old Tele which is a wonderful guitar yet sounded utter crap through the G2 - it just didn't like seeing that impedance.
Plugging the guitar straight into the amp proved that.
Could it be something like that?
When I had a Fuzz with my G2, apart from the above I got on fine as long as the Fuzz was at the front of the chain (I had it in loop 1), everything (including wah which was also in a loop) came after.
And if I'm ruthlessly honest, there was a difference between plugging the guitar directly into the amp or through the G2. Insignificant perhaps but there nonetheless.
I wonder if I will face this issue with a Gigrig quartermaster or a simple loop selector from bright onion.
That's basically the conclusion I came to, to be brutally honest - I initially loved the G2, it's cool and all - and it sounded better than the Quartermaster I had before (which I had some issues with around earthing for example).
But the Midi was limiting, and it annoyed me that I was looking at the Osmosis as an add-on.
And it does change the sound, as I said - for many guitars this was slim to a slight improvement, but for one or two - it was not.
My take on the G2 is that it's a really good product, like all products it has it's limitations - and it's certainly very well marketed if you get what I mean.
As a workaround, I considered putting more pedals before/after the G2, I think a few people do that - maybe that will work for you, ultimately I decided that was a step too far for me
I've had two quartermasters - neither the flip flop version, but still current models.
They're great little units, and I wouldn't discourage anyone from them. But a few things to remember - firstly your signal is passing through the relays, whether that bothers you or not is up to you but it's a thing.
I had ground loop problems with how I really wanted to use them, I wanted to have the amp pre-amp in a loop - so basically a 4CM set-up, and had really bad ground loop issues.
I have to say, that was a time I was really disappointed with the gigrig support, which was excellent later on with the G2 - basically they tried to sell me a humdinger with no promise it would work - and kind of admitted that because of the shared ground between all loops this could happen, whilst at the same time - never really admitting it was.
That disappointed me, basically the quartermaster is a well wired up series of relays - nothing wrong with that, but like much of the gigrig stuff, there's always another little box to buy to give you just what you want.
If you get the Q8, your signal will pass through 8 relays, and whatever pedals are on will be sharing a common earth rail - which is ok, most of the time but maybe not
I don't want to come across as down on Gigrig, I like Dan when I've spoken to him, and they're good products. But they don't cure cancer, and they sometimes introduce just as many issues as they solve (just like any other tool).
I would certainly consider a quartermaster or G2 based solution in the future, but not without a lot more planning
Well according to the website this provides isolated power, so that's good.
But the common rail I was referring to is the signal rather than the power - so I don't suggest it will cause issues, but it was something that did cause me a problem in a couple of scenarios, where you have something introducing noise or a loop into the signal path - that goes across the whole unit
Hope that makes sense
Would a simple true bypass looper from bright onion help the same? No need for led or power even. I just want to get 4 loops out of the signal path:
1) fuzz, octavia and dirt
2) univibe
3) tuner
4) compressor, trem/boost, reverb, Leslie
wah before their loops, pre amp after them.