It looks like you're new here. If you want to get involved, click one of these buttons!
Subscribe to our Patreon, and get image uploads with no ads on the site!
Base theme by DesignModo & ported to Powered by Vanilla by Chris Ireland, modified by the "theFB" team.
Comments
finish would be chrome ideally, but black wouldn't look bad either.
Hole dimension I don't know off top of my head, just read a few places that these types are direct replacements that don't need drilling.
would need to be 3L/3R set up as opposed to inline.
i have a set of gotoh locking tuners that I had fitted to a prs se.
http://imgur.com/gallery/IwlnS
If you want I’ll post them to you and if they work out you can pay 35 ppg.
Kind regards.
Any chance you could get a shaft length measurement and diameter of them?
the diameter is 10mm at the thickest point
the length is min 22mm but with the locking bit on top extends to 25mm
dont know the model.
https://www.thefretboard.co.uk/discussion/57776/handsomerik/p1
https://www.thefretboard.co.uk/discussion/57776/handsomerik/p1