It looks like you're new here. If you want to get involved, click one of these buttons!
Subscribe to our Patreon, and get image uploads with no ads on the site!
Base theme by DesignModo & ported to Powered by Vanilla by Chris Ireland, modified by the "theFB" team.
Comments
Speaking of which, some of the "Metal" versions with double locking vibrato systems could have the neck pocket floor cut with a slope.
Squier Affinity is slimmer by approximately 5mm.
American, Japanese or Mexican guitars that seem fractionally skinnier than spec could have undergone over-enthusiastic sanding during a refinish. e.g. Removing a flaking Paisley or Floral wallpaper finish.
Or are you in dispute with a certain guitar body builder again?
Your life will improve when you realise it’s better to be alone than chase people who do not really care about you. Saying YES to happiness means learning to say NO to things and people that stress you out.
https://www.facebook.com/grahame.pollard.39/
yet another guitarbuild body with an incorrect neck pocket!...
15mm depth on a tele this time.
the blonde body in the pic above is a fender body and is bang on...
The Gb body, I’m left with saddles maxed out (the original fender noncompensated were the same) and an action that is just above too low to play...
From an engineering perspective, the definition of the requested dimension is the full thickness of the body minus the neck pocket rout.
only asked for the thickness measurement as it’s easier to measure and compare as both guitars are strung up!...
both bodies are identical thickness btw...