It looks like you're new here. If you want to get involved, click one of these buttons!
Subscribe to our Patreon, and get image uploads with no ads on the site!
Base theme by DesignModo & ported to Powered by Vanilla by Chris Ireland, modified by the "theFB" team.
Comments
There’s one of them in one of the rehearsal rooms I use from time to time and it’s more than capable of doing it’s thing.
And at least if you got it cheap you can afford to replace the speaker when it blows .
Ashdown blue cone speaker out of one of these on the right, proper speaker on the left...
I have replaced quite a few of them - I just use whichever 8-ohm Celestion or Eminence rated for at least 300W Lean Business are doing cheap that week.
It's also worth putting a piece of dense foam rubber under the power amp board to stop it vibrating with the weight of the heatsinks - that will stop a lot of the solder joint cracking problems. Be careful not to touch the heatsinks with the amp powered up - they operate at a high enough DC voltage to give you a nasty surprise!
"Take these three items, some WD-40, a vise grip, and a roll of duct tape. Any man worth his salt can fix almost any problem with this stuff alone." - Walt Kowalski
"Only two things are infinite - the universe, and human stupidity. And I'm not sure about the universe." - Albert Einstein
Oh, and I played the fretless all rehearsal and got away with it. Crikey.