WTD - 5 hole single ply mini humbucker Tele pickguard (black)

Comments

• lovestrat74 Frets: 2512

  November 2019

  Or know where I can get a bakelite one?

  0 LOL 0 Wow! 0 Wisdom
• lovestrat74 Frets: 2512

  January 2020

  Is there anybody there?????

  0 LOL 0 Wow! 0 Wisdom
• SteveRobinson Frets: 7006

  January 2020 tFB Trader

  Is this any use?
  
  https://photos.app.goo.gl/FuH8ErSKjkpcJcBM9
  
  If @MattNovak doesn't want it you are welcome to it. It does have a few scratches from storage

  Lacquer demos here: https://www.manchesterguitartech.co.uk/category/finish/

  0 LOL 0 Wow! 0 Wisdom
• lovestrat74 Frets: 2512

  January 2020

  SteveRobinson said:

  Is this any use?
  
  https://photos.app.goo.gl/FuH8ErSKjkpcJcBM9
  
  If @MattNovak doesn't want it you are welcome to it. It does have a few scratches from storage

  Thanks @SteveRobinson ;that would be perfect - let me know  
  
  

  0 LOL 0 Wow! 0 Wisdom
• SteveRobinson Frets: 7006

  January 2020 edited January 2020 tFB Trader

  I've just realised that the bridge cutout is for a P-90, can you fix that? I can if not.

  Lacquer demos here: https://www.manchesterguitartech.co.uk/category/finish/

  0 LOL 0 Wow! 0 Wisdom
• lovestrat74 Frets: 2512

  January 2020

  SteveRobinson said:

  I've just realised that the bridge cutout is for a P-90, can you fix that? I can if not.

  If you can, if not I am sure I can give it a go - let me know what I owe you..

  0 LOL 0 Wow! 0 Wisdom
• MattNovak Frets: 907

  January 2020

  Hi @SteveRobinson - I should have said, I'm after a white one! Many, many thanks for your kind offer though. @lovestrat74 ;
  its all yours
  
  

  www.theflyingacesband.com

  0 LOL 0 Wow! 0 Wisdom
• lovestrat74 Frets: 2512

  January 2020

  MattNovak said:

  Hi @SteveRobinson - I should have said, I'm after a white one! Many, many thanks for your kind offer though. @lovestrat74 ;
  its all yours
  
  

   
  
  

  0 LOL 0 Wow! 0 Wisdom
• lovestrat74 Frets: 2512

  January 2020

  lovestrat74 said:

  SteveRobinson said:

  I've just realised that the bridge cutout is for a P-90, can you fix that? I can if not.

  If you can, if not I am sure I can give it a go - let me know what I owe you.. I'll pm you @SteveRobinson ;

  
  

  0 LOL 0 Wow! 0 Wisdom
• SteveRobinson Frets: 7006

  January 2020 tFB Trader

  I'll get the router out later.
  
  Just one other thing, this is cut for P-90/mini hum in a surround, like a Les Paul deluxe, it's no use for a pickguard mounted pickup.

  Lacquer demos here: https://www.manchesterguitartech.co.uk/category/finish/

  0 LOL 0 Wow! 0 Wisdom
• lovestrat74 Frets: 2512

  January 2020

  SteveRobinson said:

  I'll get the router out later.
  
  Just one other thing, this is cut for P-90/mini hum in a surround, like a Les Paul deluxe, it's no use for a pickguard mounted pickup.

  Ahh! Okay let me get back to you. So I would need a surround that converts a P90 route to mini humbucker? P90 being taller than a mini hb?

  0 LOL 0 Wow! 0 Wisdom
• SteveRobinson Frets: 7006

  January 2020 tFB Trader

  Yes it would need to be mounted like this: https://photos.app.goo.gl/NG8UKmcZhobQxuqB6
  
  The pickup is mounted in the ring and the fixing screws locate in a bracket mounted on the floor of the rout.
  
  The rout needs to be 20mm deep or so for a neck pickup
  
  
  

  Lacquer demos here: https://www.manchesterguitartech.co.uk/category/finish/

  0 LOL 0 Wow! 0 Wisdom
• lovestrat74 Frets: 2512

  January 2020

  SteveRobinson said:

  Yes it would need to be mounted like this: https://photos.app.goo.gl/NG8UKmcZhobQxuqB6
  
  The pickup is mounted in the ring and the fixing screws locate in a bracket mounted on the floor of the rout.
  
  The rout needs to be 20mm deep or so for a neck pickup
  
  
  

  Okay thanks for clarifying Steve. I think it is probably more hassle than it is worth tbh.  Thanks for the offer all the same. Might jut have to buy a pickguard mounted one instead

  0 LOL 0 Wow! 0 Wisdom