It looks like you're new here. If you want to get involved, click one of these buttons!
Subscribe to our Patreon, and get image uploads with no ads on the site!
Base theme by DesignModo & ported to Powered by Vanilla by Chris Ireland, modified by the "theFB" team.
Comments
You might still be on the verge of under powering the pedal though.
Studio: https://www.voltperoctave.com
Music: https://www.euclideancircuits.com
Me: https://www.jamesrichmond.com
Is it either of these ?
https://www.sweelee.com.sg/products/voodoo-lab-ppap-current-doubler-adapter-cable
You don't want a voltage doubler.
FWIW Strymon don't make their own current doubler and say to use a 3rd party option.
Studio: https://www.voltperoctave.com
Music: https://www.euclideancircuits.com
Me: https://www.jamesrichmond.com
Sweet. Cheers mate
i got a voodoo labs current doubler to run 2 slots into 1, a polarity reverse cable, and a Diageo line6 2.1 to 2.5 adapter. Basically I reversed the polarity twice within the three cables.
From line 6's own site...
Yeah, but that honkin’ huge DC-3G power supply is like a third the size of the entire pedal!
The power supply is large, yes. To ensure the same signal integrity of its bigger brothers, we needed a burly power supply.
That said, here’s a far-from-comprehensive list of third-party power supplies that we’ve tested with HX Stomp:
IMPORTANT NOTE #1: HX Stomp’s sophisticated circuitry pulls notably more than your average pedal. Hence, we used a DC IN jack with a larger center pin to sort of disincentivize people from throwing whatever at it. The stock DC cables that come with the power supplies listed above will NOT fit. Note that Eventide does the exact same thing with their H9.
IMPORTANT NOTE #2: YOU ARE ON YOUR OWN. Feel free to use this FAQ as a starting point, but Line 6 is not responsible for any damage incurred when using HX Stomp with any third-party power supplies. That is, if someone writes "B-b-but Line 6 said I could use [power supply X!]," someone will hopefully refer them to this post where I make it perfectly clear that we only *officially* support our DC-3G.
Works fine with a Truetone CS7 from one of the 500ma outputs, but they can supply more current that their labels suggest.
Zuma/Ojai.
Line 6 advise that the Stomp takes 9v and around 1.5a to power up and then the 1.5a drops when it’s up and running.
I’ve got the relevant adaptors, cables, power supplies to try all the different options available so will report back.
Btw, used the Stomp for 90% of my gig last night running into a clean Badcat and I had so much great feedback about my guitar tone! More than I’ve had from using any other setup
Try Hotrox as that’s where I got mine recently
I still don't really understand how that works.
Tried the Voodoo Labs current doubler again with relevant 2.1mm/2.5mm adaptor from two ports on my Zuma and this worked perfectly!
been using the Ojai to power my hx stomp for a while now and it works perfectly.
The voodoo lab ppap is what you need, then I use a regular power cable with a little 2.1- 2.5mm barrel adaptor on the end. Ex-Pro DC Adapter - 2.1mm Female to 2.5mm Male https://www.amazon.co.uk/dp/B004FZ050G/ref=cm_sw_r_cp_api_i_XQRVCbNNS9A91
I have a suitable adapter cable so gave it a try with the Stomp and voila! - works a treat.
I have a current doubling cable somewhere so I assume I just need the adaptor linked above.