Behold my massive board of pedals

Longtallronnie · August 2013

@not_the_dj

No but you can "pre arm" it so you can go from bypass to boosted drive if that makes sense? It's a frickin awesome pedal but one thing I would say is that the boost is great for solos etc but not as a subtle clean boost. Even with the boost gain set to minimum it still adds some dirt which is fine for how I use it.

I love all the different switches as they make it easier switching form my 335 (humbuckers) to my SG (P90s) mid set. The SG's output is slightly lower but switching from plexi to blue mode adds enough oomph to save faffing about twiddling knobs etc. I tend to set and forget once I've found a sound I like.

not_the_dj · August 2013

@longtallronnie Hmm. One of the best featured of the Gristle King I use is the boost works seperately, and you can choose to have it pre or post gain. If the Bogner did that it would be ideal for me.

monquixote · August 2013

I actually like it the way the bognor works.

On completely separate twin pedals when you are pushing the second stage really hard with the first if you turn the second stage off you tend to get a massive volume bump which is not cool.

Longtallronnie · August 2013

@not_the_dj You should try a Double Hotcake.

I love the way that works but I'm not very good at explaining it.

Drew_TNBD · August 2013

ftumch said:

Here's mine, I did just buy a big knob fuzz face but it was bllxd so I sent it back. http://i1131.photobucket.com/albums/m544/kevinstead/DB8EF020-ABC9-4B5C-B7E6-761902502098-622-0000004C51FA77BB.jpg My new acquisition, I just picked this up this morning (thanks Casper) This thing is awesome, I bloody love it. Can't stop playing the 'pull me under' intro http://i1131.photobucket.com/albums/m544/kevinstead/0840ACD0-0ACD-45EB-97FA-C8A664D95559-622-0000004C5D894FA4.jpg

How is the AMT wah?? Is it difficult to use, it being so small?

ftumch · August 2013

Drew_fx said:

ftumch said:

Here's mine, I did just buy a big knob fuzz face but it was bllxd so I sent it back. http://i1131.photobucket.com/albums/m544/kevinstead/DB8EF020-ABC9-4B5C-B7E6-761902502098-622-0000004C51FA77BB.jpg My new acquisition, I just picked this up this morning (thanks Casper) This thing is awesome, I bloody love it. Can't stop playing the 'pull me under' intro http://i1131.photobucket.com/albums/m544/kevinstead/0840ACD0-0ACD-45EB-97FA-C8A664D95559-622-0000004C5D894FA4.jpg

How is the AMT wah?? Is it difficult to use, it being so small?

I struggled with it at first, in fact I'm only just getting used to it now. You need to position your foot on it properly, using your toe rather than your whole foot like me. I'm also quite over enthusiastic while using wah and I think with this even more so, smaller movements are better. It sounds great though.

John_P · August 2013

My main gigging board...

http://i1332.photobucket.com/albums/w617/johnpinchin2/null_zps74db356e.jpg

I run it into a Fender twin.

Senn wireless IEM, Senn guitar wireless, Dunlop 95Q, G system, Zendrive, Suhr Riot, Wampler pinnacle, Decimator noise gate, Polytune, Eb volume.

citizen68 · August 2013

My current setup - likely to change suddenly without any notice.

Jen crybaby off the board. Me and that there CS2 have been through a lot together :-O

bandmaster188 · August 2013

LightB4sound · August 2013

Here is my latest incarnation!!

Grumpyrocker · August 2013

I did post this elsewhere on here today. First pedalboard I've put together since buying the Behringer PB-1000 last week. Needs some work - fewer dirt pedals and a wah/volume.

Grumpyrocker · August 2013

Behold - Mark II

MojoPin · August 2013

Drew_TNBD · August 2013

Lates version:

MrSwanson · August 2013

This page is bad for my GAS!!!?!?!

Paul_C · August 2013

it fits in the top of my cables box, thus:

cbellanga · August 2013

Mine:

benvall · August 2013

Drew_fx said:

Lates version:

@Drew_fx do you use this with your JVM? What about the JVM footswitch?

Drew_TNBD · August 2013

Yes mate. JVM footswitch sits on the floor in front of the pedalboard. Just recently got the Zoom, but it will go into the effects loop.

benvall · August 2013

Drew_fx said:

Yes mate. JVM footswitch sits on the floor in front of the pedalboard. Just recently got the Zoom, but it will go into the effects loop.

Looks like you need a bigger board then!

Howdy, Stranger!

Categories

In this Discussion

Become a Subscriber!

Behold my massive board of pedals

Comments