It looks like you're new here. If you want to get involved, click one of these buttons!
Subscribe to our Patreon, and get image uploads with no ads on the site!
Base theme by DesignModo & ported to Powered by Vanilla by Chris Ireland, modified by the "theFB" team.
Comments
"Take these three items, some WD-40, a vise grip, and a roll of duct tape. Any man worth his salt can fix almost any problem with this stuff alone." - Walt Kowalski
"Only two things are infinite - the universe, and human stupidity. And I'm not sure about the universe." - Albert Einstein
You'll need to change the thimbles. You can get some from Staytrem, think they're on his ebay shop, and cost about £7.
If so, are these difficult to remove?
I already have the mustang bridge (present from mini gc1).
"Take these three items, some WD-40, a vise grip, and a roll of duct tape. Any man worth his salt can fix almost any problem with this stuff alone." - Walt Kowalski
"Only two things are infinite - the universe, and human stupidity. And I'm not sure about the universe." - Albert Einstein
I bought the correct sized thimbles from Staytrem (12mm) but they did not come with a bolt..
They will send you one if you request it separately
Easy & safe way to remove bushings is use a bolt, a washer and a socket from yr toolkit. Or similar random parts from the "might be useful one day" stash -
http://www.alleykat.co.uk/images/stuff/lp/pulled_bush_2.jpg
And to insert then, wind in a bolt part-way and tap home with a hammer.
Second this; I have one fitted on my Squier J Mascis, and couple that with shimming the neck and you've got yourself one hell of a good'un. Bright as you like.
I've been thinking about replacing the Gotoh TOM that I put on my JM Jazzmaster with a Wilkinson Roller bridge.
Sorry if I'm being a bit dim here but I think the posts on the JM are 6mm but the holes on the Wilkinson are 4mm. Did you switch the posts too or am I getting it all wrong?