Pick Up going slightly micro; non-potting solutions?

GassageGassage Frets: 30929
I've two guitars where the pups are going eversolightly microphonic.

One is a single bridge tele, the other is an HB.

I hear you can use shellac or insulation tape to fix?

Thoughts?

*An Official Foo-Approved guitarist since Sept 2023.

0reaction image LOL 0reaction image Wow! 0reaction image Wisdom

Comments

  • AlegreeAlegree Frets: 665
    tFB Trader
    Bad ideas.
    One is likely to destroy the pickup, and the other will achieve nothing.
    Alegree pickups & guitar supplies - www.alegree.co.uk
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
  • p90foolp90fool Frets: 31621
    I've flowed candle wax into a gap between the baseplate and the bobbin on a Tele pickup with good results. I didn't pot the windings at all.

    With a H/B it could be a variety of things, from loose bobbin screws to a cover which needs clamping properly when being resoldered, ie not necessarily microphonic windings. 
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
  • ICBMICBM Frets: 72475
    Try putting some foam rubber under them in the cavities - it will damp out the vibrations a bit.

    "Take these three items, some WD-40, a vise grip, and a roll of duct tape. Any man worth his salt can fix almost any problem with this stuff alone." - Walt Kowalski

    "Only two things are infinite - the universe, and human stupidity. And I'm not sure about the universe." - Albert Einstein

    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
  • FunkfingersFunkfingers Frets: 14492
    How is the Telecaster pickup mounted? Using metal springs or sections of rubber tubing? The latter method may dampen unwanted vibrations. 
    You say, atom bomb. I say, tin of corned beef.
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
  • VoxmanVoxman Frets: 4725
    edited December 2017
    If your p/ups have gone microphonic you really need to have them repotted. Although you can try repotting p/ups yourself, it's fiddly and you could damage your p/ups unless you know what you're doing.  The good news is that its not expensive to have the p/ups professionally repotted - my local guy only charged me £25 for two p/ups.  
    I started out with nothing..... but I've still got most of it left (Seasick Steve)
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
Sign In or Register to comment.