It looks like you're new here. If you want to get involved, click one of these buttons!
Subscribe to our Patreon, and get image uploads with no ads on the site!
"This is the new PB-1 100 Watt Attenuator This post is for the RED surface color Attenuation: This is a rotary switch that selects the amount of attenuation. Min position is true by¬pass. Positions 4-1 adds 1.8 dB of attenuation per click. Studio Level: A rheostat that will adjust the amp?s output from -7.2 dB down to -30 dB. The PB1 attenuator was designed to let you maintain your amp?s tube tone at higher volumes where the tubes really start to sing and great dynamic responses are created, while keeping the overall volume under control.On stage, at home jamming or especially in home studios to really attenuate the overall volume down to 1 watt or less (amp less 100w) The PB1 gives you unlimited flexibility for different volume levels. The PB-1 is designed for up to 100 watt max tube amplifiers only. This is a resistor-based model like Dr. Z and other quality attenuators that hooks in line from the speaker to the head not in the effects loop etc."
£115 posted from High Wycombe.
Base theme by DesignModo & ported to Powered by Vanilla by Chris Ireland, modified by the "theFB" team.
Comments