Both sold

paganskins

A couple of Fishman piezo bridged chambered semis for your consideration.

Prices are posted in the UK and assume buyer covers PayPal fees. Ideally looking for straight sales but do feel free to offer trades. I'm based in Swansea.

Sold Parkwood (Cort) H4 Hybrid Guitar Fishman PIezo bridge, SD mini humbuckers, hard case £400 sold

More pics here

In excellent condition, original except for changed knobs, original knurled, telecaster style knobs also included.

• Exotic Australian blackwood top over chambered mahogany body (exactly the same body shape and dimensions as a Cort Sunset II)

• Mahogany neck with rosewood fretboard

• Two Seymour Duncan mini humbuckers (SM1N neck/SM3B bridge)

• Fishman Powerbridge piezo system

• Vol and Tone for mags, stacked vol/tone for piezo, mini toggle selects mags/both/piezo

• Stereo jack allows you to run two amps with stereo cable, or one amp with mono cable

• Grover tuners

• Deluxe hard-shell case

Guitar weighs 7.6lb or 3.35kg which is impressive given the body is 14.5in (37cm) wide. Body length is 18in / 45.5cm. 

Neck is 1.7in (43.2mm) wide at the nut and .83in (21.2mm) deep. At the 12th fret width is 2.06in (52.5mm) and depth .91in (23.1mm). 

SOLD Gibson Midtown Standard professionally upgraded with Bigsby B6 Tremolo, Towner B6 reversible installation kit and Fishman Piezo Powerbridge and Powerchip preamp. £800 (or £700 without the Bigsby and Towner setup) SOLD 

More pics here

In good condition except for a cloudy, finish flaw on back heel area due to reaction with guitar stand (difficult to see) and a very small (1-2mm) finish chip on one corner of the headstock.

Fishman piezo powerbidge and powerchip preamp professionally fitted, an additional micro switch was added to choose magnetic pickups, piezo or both. Original wiring of 2 x volume, 2 x tone has been converted to 2 x magnetic volume, magnetic tone and piezo volume. 9v battery is housed inside the control cavity.

Stereo jack allows you to run two amps with stereo cable, or one amp with mono cable

The piezo bridge installation is reversible apart from the hole drilled for the micro switch and a small notch which was made in the bridge pickup ring for the cable running from the bridge.

Bigsby installation is completely reversible and the original stop tailpiece is included.

Otherwise stock, burstbuckers, grovers, original pots for mags etc.

This is a 2015 model but never had the tronical robot tuning fitted nor the titanium nut from that year. It also doesn't have the wider nut width which many models from the year had. 

Also includes the original case which has suffered damage on the back but still works as it should.

More details on the Bigsby model http://www.bigsby.com/vibe/products/vibratos/bigsby-b6/

Towner B6 kit http://townerusa.com/product/bigsby-b6-kit-with-towner-system-stainless-steel-aluminum-2/

Fishman Powerbridge https://www.fishman.com/products/series/powerbridge/TUNE-O-MATIC-POWERBRIDGE-PICKUP/

Fishman Powerchip https://www.fishman.com/accessories-tuners/powerchip/

paganskins

Bump

Edit: had a trade enquiry and rather than waste potential traders time a list of things I'm interested and not interested in follows.

Not interested in
Big amps (physical size and wattage)
Effects – except a wah/volume which can run on batteries and a ABY with ground lift and phase reversal
Pointy, metlah guitars
Bass, keyboard or PA gear

Might be interested in
Traditional styled guitars
Jaguar, Jazzmaster or other offsets
Possibly a less blingy PRS
Gretsch
Small amps