3M Dual Lock

PC_Dave

Anyone know of any shops that sell this stuff? Or is it an online order job?

Cheers

Dave

simonbeckwith

eBay is your friend

Fenderish

or amazon (take the slim type product code SJ4575) https://www.amazon.co.uk/3M-SJ4575-Profile-Reclosable-Fastener/dp/B004O99BGM/ref=sr_1_1?keywords=SJ4575&qid=1557592674&s=gateway&sr=8-1&th=1

Fenderish

never coming back from this btw

Wazmeister

Amazon 

PC_Dave

Fenderish said:

or amazon (take the slim type product code SJ4575) https://www.amazon.co.uk/3M-SJ4575-Profile-Reclosable-Fastener/dp/B004O99BGM/ref=sr_1_1?keywords=SJ4575&qid=1557592674&s=gateway&sr=8-1&th=1

Is this the shizzle? I want something that’s going to hold my HX Stomp in place.... don’t want to risk that getting loose...

clarkefan

Yep.  It's relatively expensive but you don't need a lot and it works.

digitalkettle

That’s the stuff...keeps my power supply stuck upside down under my pedalboard. In fact, you could lift the whole board with it!

GoldenEraGuitars

That reminds me... I need some too. Is this the stuff Dan recommends on TPS?

clarkefan

Dan uses his own-branded pedalboard tape but did say in a recent-ish board build vid that it was Dual Lock.

schrodinger1612

Buy online. Don't bother with the B&Q stuff...it's a rip off 

PC_Dave

Cheers chaps, will order now 

GoldenEraGuitars

clarkefan said:

Dan uses his own-branded pedalboard tape but did say in a recent-ish board build vid that it was Dual Lock.

Ta muchly, I’m gonna scan back through the videos to find the reference. It wasn’t that long ago

PC_Dave

@GoldenEraGuitars ;

https://shop.thegigrig.com/pedal-board-tape/

PC_Dave

Right, another question - each section on my pedaltrain is 50mm - the options on amazon seem to be 25mm...... 

Corvus

For a rough idea I've got Strymon size ones with four squares say half inch square or so, maybe a smidge bigger but not much. Normal size pedal I cut the 25mm into 3 lengthwise, two strips of that's enough. I've got a PSU hanging underneath off Dual Lock, two strips of 25mm cut in half.
This is the 3550 tape, bought some more yesterday so looked up the model, there's two types I think. Its strong old stuff.

digitalkettle

Yep, too much coverage and you’ll struggle to get them apart without levering them with a screwdriver!

clarkefan

GoldenEraGuitars said:

clarkefan said:

Dan uses his own-branded pedalboard tape but did say in a recent-ish board build vid that it was Dual Lock.

Ta muchly, I’m gonna scan back through the videos to find the reference. It wasn’t that long ago

Here you go, about 26:30 according to the helpful notes:

Fenderish

PC_Dave said:

Right, another question - each section on my pedaltrain is 50mm - the options on amazon seem to be 25mm...... 

you can stick two widths
careful to not put too large patches on your pedals or they'll be sticked forever haha  

horsehead

that link at the top is about 3 to 4 weeks lead time, is there anywhere else that does it?

PC_Dave

horsehead said:

that link at the top is about 3 to 4 weeks lead time, is there anywhere else that does it?

I realised that after I’d ordered some. *Facepalm*