Mojo and Creamery pups in Tele out of phase

lovestrat74

I have installed a Creamery WRHB in the neck of my Tele. The bridge is a Mojo Broadcaster. The middle and bridge sound out of phase.

Is this because of the direction of the wind on the pups?

The neck pup is a single braided wire. If I swapped the hot and ground around on the bridge pup would this address the out of phase issue?

bbill335

swap the wires from the bridge pickup to the switch+ground, but also make sure the baseplate is still grounded by moving that connection to the other eyelet. 

lovestrat74

bbill335 said:

swap the wires from the bridge pickup to the switch+ground, but also make sure the baseplate is still grounded by moving that connection to the other eyelet. 

Nice one bill