Dimarzio pickups. Injectors / Area 61 / Fred / and others

fretmeister

Scratchplate NOT included:

Set of 3 pickups with switch and pots. (SOLD PENDING PAYMENT)

Neck: Dimarzio Injector neck
Middle: Dimarzio Area 61
Bridge: Dimarzio Injector bridge

CTS tone pots, and the lovely but expensive EVH Bourns low friction Volume pot.

The Injectors are the Paul Gilbert high output stacked humbucker. They sound amazing with higher gains, but also sound good with cleans. The Area 61 is lower output compared to the others.





The pickups, pots, switch etc would run to about £250 new.

Selling all - staying wired together for easy installation into your scratchplate. You'd just have to do the jack.

£170.00 including postage.

PRICE DROP TO £150 delivered UK

**SOLD PENDING PAYMENT**




----------------------------------------------------------------------------------------------------------

Dimarzio Fred.
Bridge pickup.
Once removed from a Ibanez JS1000 that I owned many years ago.
Wires long enough for bridge position.



No box.

£50 including postage.

PRICE DROP TO £40 delivered UK


---------------------------------------------------------------------------------------------

Dimarzio Air Norton
F Spaced for the bridge

Had it in my strat for a while. Very nice, but I've gone back to traditional single coils. Enough wire for bridge position.



£50 including delivery.


PRICE DROP TO £40 delivered UK


Not looking for any trades.

fretmeister

Bump

fretmeister

Bump with price drops.

axisus

Ye tempteth me with the SCs. Always looking for that 'ideal' strat set ....

Someone should buy them before I get too tempted!!!

Siejen

Hi, could you measure the cable length for the humbuckers please? My bridge cable has to go quite a way back to a coil tap Push pot 
thanks

fretmeister

Siejen said:

Hi, could you measure the cable length for the humbuckers please? My bridge cable has to go quite a way back to a coil tap Push pot 
thanks

Missed this - I will measure them this evening for you.

@siejen ;

fretmeister

Siejen said:

Hi, could you measure the cable length for the humbuckers please? My bridge cable has to go quite a way back to a coil tap Push pot 
thanks

@Siejen ;

The Fred:






and the Air Norton:




Hopefully that helps a bit.

Or as my favourite tech keeps telling me - it's easy to add a bit of wire if needed.

Siejen

Thanks for those. You must have had a very tidy install, but I must pass. 

Thanks!

fretmeister

Single coil set has left the building.


Only the full size humbuckers left.