SOLD - Tele neck

www

GSP Basses Telecaster neck

Flame maple neck and fingerboard

9.5" radius

42mm nut width

21Stew Mac #152 frets

Soft V profile

heel truss rod adjustment

Nitro finish, expertly applied by our very own lamf68

£120 posted 

https://i.imgur.com/oBJiiIQ.jpg?1

https://i.imgur.com/fycoNJr.jpg

https://i.imgur.com/DTapCRN.jpg

https://i.imgur.com/RcHRzCG.jpg

gjonesy

Do you have the thickness at the 1st and 12th?
cheers

DrBob

Would’ve already bought this if funds had permitted. GSPBasses woodwork covered by Lamf68 spray work is my favourite combo !

DamianM

I'll take it, just need to know it will fit my pocket.

DamianM

Is the heel same dimension as all parts etc?

www

DamianM said:

Is the heel same dimension as all parts etc?

Not sure in all honesty. I'll measure it up in the morning and get back to you

www

gjonesy said:

Do you have the thickness at the 1st and 12th?
cheers

I'll measure it up in the morning and get back to you

www

www said:

gjonesy said:

Do you have the thickness at the 1st and 12th?
cheers

I'll measure it up in the morning and get back to you

23.08mm at the 1st and 26.03mm at the 12th

www

DamianM said:

Is the heel same dimension as all parts etc?

Allparts is 55.6mm (unfinished) I think. Mine is 55.65mm (including finish), so I would say yes.

I did have to take a little of the finish off but it's not visible when fitted

https://i.imgur.com/oExuFtU.jpg

https://i.imgur.com/lkDZC9J.jpg

DamianM

Ok nice, I'll take it if you want to pm your paypal details or w/e.

www

DamianM said:

Ok nice, I'll take it if you want to pm your paypal details or w/e.

Message sent, many thanks

gjonesy

www said:

www said:

gjonesy said:

Do you have the thickness at the 1st and 12th?
cheers

I'll measure it up in the morning and get back to you

23.08mm at the 1st and 26.03mm at the 12th

If it falls through I’ll take it
cheers
G