FS - Fender Pure Vintage 65 Jazzmaster bridge

liftman

Fender - £35

DD- HB101B ( '59 style for bridge )  £15 SOLD

DD- HB102N ( Jazz style for neck ) £15 SOLD

https://imgur.com/a/jAQW7PX

liftman

bump

liftman

bump

liftman

bump

lovestrat74

Does the jazzmaster pup come with cover and fixings?

@funkfingers could I put this in the neck position? I mean sonically, would it work?

liftman

lovestrat74 said:

Does the jazzmaster pup come with cover and fixings?

@funkfingers could I put this in the neck position? I mean sonically, would it work?

No cover unfortsh , just four screws.

Funkfingers

lovestrat74 said:
could I put this in the neck position? I mean sonically, would it work?

Yeah but no but …

Obviously, the pickup will work in any position. The polepiece spacing is the same for bridge and neck. The covers are the same size. There is not a massive difference in output between bridge and neck.

The negative aspects are;
1) The magnetic polarity and coil direction will not cancel hum when combined with a second JM bridge position pickup.
2) If liftman's pickup has been removed from a Fender AVRI or AV guitar, the black conductor wire may be cut very short.

If the black conductor is shortened, on a regular Jazzmaster, you might get away with grounding the pickup to the chassis of the Rhythm Circuit slider switch.

lovestrat74

Funkfingers said:

lovestrat74 said:
could I put this in the neck position? I mean sonically, would it work?

Yeah but no but …

Obviously, the pickup will work in any position. The polepiece spacing is the same for bridge and neck. The covers are the same size. There is not a massive difference in output between bridge and neck.

The negative aspects are;
1) The magnetic polarity and coil direction will not cancel hum when combined with a second JM bridge position pickup.
2) If liftman's pickup has been removed from a Fender AVRI or AV guitar, the black conductor wire may be cut very short.

If the black conductor is shortened, on a regular Jazzmaster, you might get away with grounding the pickup to the chassis of the Rhythm Circuit slider switch.

OK thanks for the Wiz. 

@liftman I think I'll give it a miss, but thanks for the info

liftman

lovestrat74 said:

Funkfingers said:

lovestrat74 said:
could I put this in the neck position? I mean sonically, would it work?

Yeah but no but …

Obviously, the pickup will work in any position. The polepiece spacing is the same for bridge and neck. The covers are the same size. There is not a massive difference in output between bridge and neck.

The negative aspects are;
1) The magnetic polarity and coil direction will not cancel hum when combined with a second JM bridge position pickup.
2) If liftman's pickup has been removed from a Fender AVRI or AV guitar, the black conductor wire may be cut very short.

If the black conductor is shortened, on a regular Jazzmaster, you might get away with grounding the pickup to the chassis of the Rhythm Circuit slider switch.

OK thanks for the Wiz. 

@liftman I think I'll give it a miss, but thanks for the info

Yes it is off an AVRI with short conductor wire. No probs @lovestrat74 .

liftman

bump