FS, Most of a nice Strat (GSP, GuitarBuild, Pribora, Wilkinson) + Ibanez-ish neck

DrBob

In a rare moment of clarity I’ve realised that I’ve actually moved house with some of these parts twice so it’s safe to say they’re not getting used anytime soon and I could really do with raising funds to buy a bike to get out and actually do some exercise so let’s see if we can get this stuff somewhere where it will actually get used 

Beginning with most of a nice Strat Project;

1. GSP Basses Strat neck (SOLD)

Nice bit of wood here, we all know Graham makes lovely lovely things

https://i.imgur.com/aZnwfDy.jpg

https://i.imgur.com/dtkuffu.jpg

Rosewood board over maple neck with what feels like some sort of oil/wipe on finish on the back of the neck 

stats are 

22 frets (I’m saying med/jumbo) have been used but good nick 

https://i.imgur.com/nDM3IHA.jpg

Fingerboard Rad looks to be 9.5-10” ish 

Nut width 42.6mm
Heel width , interestingly the fingerboard is actually 57mm wide but the maple heel has been taken down to fit a standard Fender 55.56mm 

Depth at 1st fret 22.2mm
Depth at 12th fret 24.5mm 

it’s a nice rounded “C” profile, bit chunkier than a Fender medium C but not massive 

It fits the GuitarBuild body below perfectly 

Its been previously fitted for Klusons, will come with the bushings fitted, little notch out just behind the nut slot and a a few little dings around the headstock perimeter 

https://i.imgur.com/jCDT6BA.jpg

https://i.imgur.com/1Egeuws.jpg

Its a really nice solid neck from the hands of the mighty Graham 

Any extra pics or detail please shout 

£90 posted 

2. Guitar Build Strat Body w/ Tort Plate 

https://i.imgur.com/1RkLa0l.jpg

https://imgur.com/gallery/K1GgyGH

Right so nice, medium/light weight Strat body which I believe is from GuitaBuild, it’s been finished in Oly white but without grain filler so the grain pops through 

https://i.imgur.com/JCwIjXh.jpg

https://i.imgur.com/Ak3DgVR.jpg

https://i.imgur.com/g0CiISZ.jpg

Looks great, bit different and really works with the included Tort plate 

https://i.imgur.com/xMoTwqY.jpg

£85 posted 

3.Pribora “Red & White” Strat Pickups (SOLD)

Handwoud by Alexander Pribora out in Russia, and I believe he pots them in wax from his fathers bees… Never installed cables never cut. Boutique quality for sub Tonerider money ! 

https://i.imgur.com/g0CiISZ.jpg

https://i.imgur.com/sZEZvh2.jpg

There’s few different demos of these on YT but here’s one from the man himself 

https://youtu.be/_ufXBUDZLrg

£50 posted ? 

4. Wilkinson WVP6 SB Strat trem

https://i.imgur.com/Ic5GzE0.jpg

Yep it’s the one with the 5 elongated holes & the one round hole allowing you to fit it to either 54 or 56mm spaced screw holes

Its got the real deal Steel trem block with staggered string holes

Its got the push fit trem arm plus tension adjustment

Its got the full set of claw, claw screws, springs & mounting screws 

£20 posted 

5. Ibanez-ish neck (needs frets & finishing)

Details on this are a bit hazy, not trying to mislead I promise just as I said, I’ve had some of this stuff kicking about for years so I’ve forgotten quite a lot of what I was told when buying this stuff ..

Its deffo not real Ibanez 

https://i.imgur.com/gWu28Tb.jpg

Multi lam 24 fret I neck with AANJ type heel 

specs are 

Nut Width 42.3mm
Heel Width 58.6mm

Depth 1st Fret 19.4mm
Depth 12th Fret 21mm

Fingerboard Rad looks to be 16” ish but given it will need sanding before fretting I guess you could change that 

It’s a bit rough 

https://i.imgur.com/VB5JF51.jpg

https://i.imgur.com/VJiaETS.jpg

it’s been de fretted so will need re fret before you can use it and it will need sanding and a finish applied 

https://i.imgur.com/hM3eGbH.jpg

https://i.imgur.com/NoIN9yk.jpg

https://i.imgur.com/EFfS5Ic.jpg

But could be made into something fairly classy I reckon ! 

£50 posted 

any more pics or details please do shout

Cheers

mrkb

Hi,
Do you know the weight of the strat body?

DrBob

I don’t have a working scale hang on I’ll see what I can do 

DrBob

Bathroom scales are saying 2kg but I’m not sure how precise they are tbh 

mrkb

DrBob said:

Bathroom scales are saying 2kg but I’m not sure how precise they are tbh 

Ok thanks, was looking to replace a 2,05kg body on current partscaster as its too heavy - so doesnt work for me. GLWS.

DrBob

mrkb said:

DrBob said:

Bathroom scales are saying 2kg but I’m not sure how precise they are tbh 

Ok thanks, was looking to replace a 2,05kg body on current partscaster as its too heavy - so doesnt work for me. GLWS.

So 5g isn’t enough of a saving ? Kidding I’m kidding 

mrkb

DrBob said:

mrkb said:

DrBob said:

Bathroom scales are saying 2kg but I’m not sure how precise they are tbh 

Ok thanks, was looking to replace a 2,05kg body on current partscaster as its too heavy - so doesnt work for me. GLWS.

So 5g isn’t enough of a saving ? Kidding I’m kidding 

sure are - it would be 50g

DrBob

Well there you go ! That’s a further 45g of weight saved ! 

dallcorp

PM sent re neck.

dallcorp

Strat neck that is

DrBob

That’s Strat neck & pickups sold pending the usual ! 

DrBob

Strat Neck, Pribora Pickups, Wilkinson Trem sold 

DrBob

Bump for a nice Strat body in an unusual finish with a classy pickguard ! 

daveyh

What wood and finish is it?

DrBob

daveyh said:

What wood and finish is it?

Now I knew this when I bought it. But that was 8 years ago. I’ve messaged the guy who I bought it from who I think did the finish, see if he can come up with anything

DrBob

Right he thinks it was it was Oly White Nitro that he applied over a non grain filled swamp ash body 

daveyh

This is extremely tempting but I was after an alder body. I shall be thinking hard on this 

DrBob

daveyh said:

This is extremely tempting but I was after an alder body. I shall be thinking hard on this 

Full disclosure, I’ve just looked over it and the tremolo holes are only starter holes , You would have to drill them to depth 

robinbowes

DrBob said:

daveyh said:

This is extremely tempting but I was after an alder body. I shall be thinking hard on this 

Full disclosure, I’ve just looked over it and the tremolo holes are only starter holes , You would have to drill them to depth 

I'm tempted by the body, but what do you mean by this?

R.

DrBob

robinbowes said:

DrBob said:

daveyh said:

This is extremely tempting but I was after an alder body. I shall be thinking hard on this 

Full disclosure, I’ve just looked over it and the tremolo holes are only starter holes , You would have to drill them to depth 

I'm tempted by the body, but what do you mean by this?

R.

robinbowes said:

DrBob said:

daveyh said:

This is extremely tempting but I was after an alder body. I shall be thinking hard on this 

Full disclosure, I’ve just looked over it and the tremolo holes are only starter holes , You would have to drill them to depth 

I'm tempted by the body, but what do you mean by this?

R.

I’ll get a picture when I’m back home in a bit !

DrBob

robinbowes said:

DrBob said:

daveyh said:

This is extremely tempting but I was after an alder body. I shall be thinking hard on this 

Full disclosure, I’ve just looked over it and the tremolo holes are only starter holes , You would have to drill them to depth 

I'm tempted by the body, but what do you mean by this?

R.

https://imgur.com/gallery/dD18igD

So as you can see. all six holes are drilled but they’re only drilled to a depth of 3mm so you would need to drill deeper to install the trem screws.

Also, I’ve just noticed, you would need to drill the two screws for the trem claw