Fractal FAS-FX Reverb

Drew_TNBD

Ahhh, like the reverb block itself sums to mono at the input? Yeah that kinda makes sense, a lot of the blocks do that AFAIK.

You could have true stereo by using both of the reverb blocks and dedicate each to L and R.

Heartfeltdawn

It's essentially the same as the M9/M13 problem. The reverbs summed to mono, most people put reverbs last, which made stereo effects beforehand pointless. Obviously with the Axe FX there is a way around that with two reverb blocks for each input like you say.

So Axe still rules  

Clarky

Drew_fx said:

I'm not 100% sure what you mean by summing to mono? The Axe has two inputs and two outputs so depending on your patch, you can make it true stereo the whole way through.

I've reamp'd this way..

sent a stereo synth in Logic to the Axe and stuffed it through some fx, and sent that back into Logic..

Heartfeltdawn

So with the Axe FX... is it easy to set up a reverb for a Left input and then copy and paste it for the Right input? 

Clarky

Heartfeltdawn said:

So with the Axe FX... is it easy to set up a reverb for a Left input and then copy and paste it for the Right input? 

yes with Axe-Edit

you can save the Reverb1 block settings

add Reverb2 to the grid and load the one you saved from Reverb1

you shouldn't need to though because the Axe inputs can be set to stereo

so if you have a stereo signal you wanted to process [rather than reamping a dry mono guitar] you'd set input 1 to stereo

the 'cables' in the grid are stereo by default.. they're only be mono if they passed through a mono effect block.. like an amp block for example

the inputs can be set to; left only, L+R sum, stereo