Amp parts - snap-in pots.

Haych

Where is a good place to buy snap-in pcb mount potentiometers? 

TAD do some fender pots but they don't have all the values I need and I've been scouring the interweb with very little (read 'no') success. 

 Any help in the right direction would be appreciated. 

 Thanks.

jpfamps

Which amp!!!!!!!!!!!

Haych

Peavey C50

jpfamps

Banzai are probably your best bet:

https://www.banzaimusic.com/Peavey-Potentiometers/

Haych

Thanks @jpfamps but I was hoping to not use Peavey parts, the 3/16" shafts are prone to breaking quite easily and the knobs fall off constantly.

ICBM

You can fix the knobs-falling-off thing very easily - cut a strip of masking tape 20mm (usual roll width) x 5mm, and fold it over the top of the shaft so it goes down both sides, then push the knob on.

I don't actually find the shafts break much more easily than the larger ones, to be honest - and you won't get anything larger through the holes without reaming them all out anyway.

Haych

Thanks @ICBM, I'll see how it goes.