It looks like you're new here. If you want to get involved, click one of these buttons!
Subscribe to our Patreon, and get image uploads with no ads on the site!
Base theme by DesignModo & ported to Powered by Vanilla by Chris Ireland, modified by the "theFB" team.
Comments
GLWTS!
If you want to use the vibrato channel then you can pull out the preamp 12ax7 from position V1 and put it into position V6 (the phase inverter) - replacing the 12ay7. Removing V1 gives you more gain to start with, and replacing the 12ay7 with the 12ax7 increases further the available gain / lower the clean headroom.
I believe that you can also disconnect 2 of the speakers without harming the amp.
Of course this is all a load of bollocks if you feel that you need to move lots of air along with getting the cranked sound ;-)
Fabulous amps, I already have one or I'd be all over this. They sound great at pretty much any volume but tend to get a bit more liquid when lit up a bit.
Have a free bump and GLWTS.
There is no 'H' in Aych, you know that don't you? ~ Wife
Turns out there is an H in Haych! ~ Sporky
Bit of trading feedback here.
^
^
^
^
^
To The Top