It looks like you're new here. If you want to get involved, click one of these buttons!
Subscribe to our Patreon, and get image uploads with no ads on the site!
Base theme by DesignModo & ported to Powered by Vanilla by Chris Ireland, modified by the "theFB" team.
Comments
So a 16-ohm amp into a 16-ohm attenuator into any speaker cab is OK, as long as the attenuator is set to at least -6dB - which it almost certainly will be with a SLP!
The Hotplate is not the attenuator of choice for a SLP - it's not great for Marshall-type and Vox-type amps in general, although it's very good for Fender and Mesa. It will stress the valves quite heavily with a SLP if you're cranking it.
The Marshall Powerbrake only has 16 and 8 ohms, not 4, but it's a much better choice for this amp.
"Take these three items, some WD-40, a vise grip, and a roll of duct tape. Any man worth his salt can fix almost any problem with this stuff alone." - Walt Kowalski
"Only two things are infinite - the universe, and human stupidity. And I'm not sure about the universe." - Albert Einstein
Not tried it with a Marshall though.
https://soundcertified.com/speaker-ohms-calculator/
Thanks for the advice, I had a powerbrake with a 1987x a few years ago and it worked well, its good to know whats the right kit.
"Take these three items, some WD-40, a vise grip, and a roll of duct tape. Any man worth his salt can fix almost any problem with this stuff alone." - Walt Kowalski
"Only two things are infinite - the universe, and human stupidity. And I'm not sure about the universe." - Albert Einstein