It looks like you're new here. If you want to get involved, click one of these buttons!
Subscribe to our Patreon, and get image uploads with no ads on the site!
Base theme by DesignModo & ported to Powered by Vanilla by Chris Ireland, modified by the "theFB" team.
Comments
On mine, the neck tone is actually a push-push that allows me to add the neck pickup to any position. I mainly use it to get neck and bridge on together. That's actually a 300kOhm pot so it's probably a bit brighter than stock.
I then have a no load tone pot wired to both bridge and middle. I do think about changing the middle over to share the neck tone, but I'll probably leave it as it is.
Other guitars also get the tone knob twiddled, the Tele particularly responds well to the tone control.
The S1 switch is, in theory, a perfect neat solution but is expensive and I've read a few reports of it being unreliable.
Despite this, I've bit the bullet and ordered one. If it breaks, I'll go the hole drilling route but if it works it should be a nice solution.
As long as it's wired as a bridge-on rather than neck-on, switching to position 1 will always get you to bridge only regardless of the position of the toggle/S1.