It looks like you're new here. If you want to get involved, click one of these buttons!
Subscribe to our Patreon, and get image uploads with no ads on the site!
Base theme by DesignModo & ported to Powered by Vanilla by Chris Ireland, modified by the "theFB" team.
Comments
That's the "fat" switch.
There's a 100nF capacitor going from Q1 to Q2 (C2 in this schematic):
All the fat switch (SPST) does is switch in another cap (4.7uF) across that cap giving it lower frequencies.
The next one I build will have a DPDT (on-off-on) switch and I'll strap two caps across the switch terminals for three fat settings. Not sure of the cap values yet, but 1uF seems good.
So for anyone using envirotex I’ve just ordered a set of these. 100 plastic cups with lines for £2.42. It’s 15p for the cups and £2.27 postage.
https://www.amazon.co.uk/gp/aw/d/B01H2SYB5C/ref=ox_sc_act_image_2?smid=ATDB1WMYL93ZS&psc=1
Here's my Fazz Fuctory, just need to fit up....
https://i.imgur.com/Fh25Coa.jpg
https://i.imgur.com/TLV7qDB.jpg
https://i.imgur.com/bhYH28Z.jpg
I sanded off all the layers of paint on mine and out of curiosity, polished it up on my buffing thingy - I might still sand it back and paint, but for now it's just going to be a shiny enclosure.
This is because I still haven't got round to building the rest of it, if I spend another few weeks doing the enclosure I'll never get it built
I'll post a pic when it's done.
Ladies and Gentleman, the Fuzzadillo!
(Note - I did not draw the Armadillo, I found it on Google Image Search).
It's a Ross compressor. I love how this one turned out. The ET is so shiny you can see the knobs reflected in the top.
Hopefully my next pour will be less stressful and I may learn to love ET.
Q
After say 24 hours, could I clean out the pot holes with a sharp blade instead of waiting for full cure and drilling?
I will say say you do have to be really careful though I have gotten finger print marks on mine after 24 hours which never came out.