It looks like you're new here. If you want to get involved, click one of these buttons!
Subscribe to our Patreon, and get image uploads with no ads on the site!
Base theme by DesignModo & ported to Powered by Vanilla by Chris Ireland, modified by the "theFB" team.
Comments
I'm thinking something vaguely like this (love the controls on this but that might be too ambitious).
Still like to do competition stripes or similar... and now I'm thinking about the headstock shape....
I get all my looms from Marc at Mojopickups - top quality stuff
any pics of the kit? I nearly went for this one.
As for converting it to a set-neck. I wouldn't bother. Juniors are made much like a bolt-on neck anyway, they don't have the usual gibson tenon, the neck is left full width and sits in a full width pocket. so technically making one a set neck is just a case of gluing the neck in place, but you also need to ensure neck angle is correct and you have a solution for screw holes before you do this. You also need to be sure there is no trace of a finish or sealer coat on the join
Instagram
All seems pretty reasonable for the cost. Neck fit is really good - neck screw drillings are wildly wonky!
Neck is very chunky - like that a lot.
Will be changing the pickup - more info follows...
Instagram
Doubt I'll finish in the alloted period but hoping to get going a bit soon.