Greetings folks,
As mentioned in a couple of other threads, I am going to visit the chaps at Brook to discuss the building of a 12 string, probably Tavy but to be confirmed. As part of the process, I have asked them if it is OK to provide some of the timber for the guitar. I have collected a small selection of acoustic back and side sets, and some interesting topwood. Anyway, tomorrow my wife and I are heading down to Devon from Stirling. And these are the sets I am taking for their assessment. Let me know your thoughts.
First up is some Australian top wood - Huon Pine and King Billy Pine. None of the grain is straight, but it has a wonderful aroma, and some *very* interesting bear-claw-on-steroids figuring. Also lightweight and a pleasing tap tone.
https://i.imgur.com/RITRQ4d.jpgWith a flash to highlight the figuring
https://i.imgur.com/C7e0Asw.jpgNext, the back wood, from left to right : Flamed myrtle, ?grenadillo?, lace she-oak. You really cant see the patterning on the she-oak, but it is stunning.
https://i.imgur.com/2uGjpFh.jpgAnd lastly, some Tazmanian blackwood,(not unlike Koa) and cocobolo. The cocbolo in particular has a bright, glassy tone when handled, and just oozes 'build me'.
https://i.imgur.com/Y5qH2tm.jpgSo there you go. The reason I'm taking it down is that I will never get around to building with all the wood I have as a hobby, so I might as well get it used by experts...
Cheers,
Adam
Comments
If it’s staying natural in colour you will likely have some crazy run-out and/or knots.
Go spruce ontop and be done.
I’m a back n sides oak fan though
To clear a couple of things up, im not going with a 'this is my timber and you must use it' mentality - i have too much respect for craftsmen to do that. More a 'i would like you to use this, if you think it is suitable' frame of mind. If Brook feel that it isnt, then i am absolutely happy with that.
Also, whilst pine is in the name, neither are true pines. In the same way that Spanish Cedar is neither cedar nor Spanish. In fact, Huon Pine is harder than Sitka (according to Janka scale).
Both were bought from this place, which irritatingly seems to be undergoing site maintenance right now.....
https://australiantonewoods.com/index.php?route=common/home
Out of interest, Andy, why do say more mainstream woods should be used? For potential resale or tone? Im curious, is all.
Either way, I'll find out on Monday
Adam
However good a more unusual topwood might be tonally, I could see it could have a detrimental effect on the resale value just because of market fear of the unfamiliar.
To be honest, resale value for me is an absolute non-event. This guitar is being purchased as a 10th wedding anniv gift (my wife got an eternity ring), so the value is in what it represents - it will never be sold by me. And this is also why im aiming for a more 'personal' instrument.
Cheers,
Adam
Have a great trip and make sure you go for something really special - but something in which you can be confident in that it will sound as good as it looks.
I take the point about stability/deformation undee tension etc especially with a 12 string. However, i have had these boards for at least 10 years and they havent moved at all.
Its almost impossible to tell the degree of quartering from the views i have given - i'll take some more photos when i get a chance.
What is this Moon spruce you mention? Harevsted during a particular moon phase?
Again, thank you for your comments, they are appreciated.
Adam
According to Simon at Brook, Redwood generally takes a lot more playing in to open up and can sound it bit "wet" until it does - with the effect being more noticeable on larger bodied guitars.
Their take on a Gibson 185 jumbo shape
640mm scale
Cocobolo b&s
Huon pine soundboard
Mahog neck
Anjan fretboard (same as my Tavy)
No cutaway
Gloss finish
They were quite happy with all of the timber i took down, and voiced no reservations about the sounboards. So, im entirely happy to trust them with that.
All i have to do now is wait 6-8 months for completion!
Cheers,
Adam
I am going to build an acoustic with a quartersawn yellow pine top (longleaf I believe), which was in a family barn as a beam for a long time. It was probably cut down 100-200 years ago. There is a risk it won't work well, but worth the risk in my opinion. Building myself (with help from a friend who's definitely an expert!) there is admittedly less financial risk but still I am quietly confident....
My YouTube Channel
Nevertheless, they sound different! Obviously similar, but distinctive just the same. Koa is more rounded and gentle, Blackwood is harder and has more top end ring. Both great sounds.
I would absolutely want to play the particular instrument first (as they seem to vary quite a lot) but one of these days if the stars align, I'll have an all-Blackwood guitar and an all-Koa one. Similar but different. What a delightful pairing they would make!
I've been on a massive research binge.
I've initially been disappointed with some mahoganies as they don't have that shimmer and their EQ is narrow.
BUT... I get it now. They're "warm" - I really understand what folk mean by that now.
Sapele, as you've said prior, is closer to maple in many ways.
Because sapele EQ is flat, I can see how some folk think it sounds flat.
The woods I've really enjoyed have all had similar weight & Janka hardness.... sapele, Black Siris, mahogany is close enough... all absorb a bit of sound, not too dense, not too many overtones, some mid-range grunt and treble shimmer. Other woods with similar ratings I want to check are sipo, honduran & cuban mahogany...
So I've been reading about Aussie Blackwood & Ovangkol because these appear to have characteristics I might like.
Ovangkol a wide EQ with mid-range hump.
Aussie Blackwood being described as having nice trebles, flattish EQ, a bit like mahogany but more bass.
All very interesting...
I love the koa 3D sound effect but it's maybe a bit glassy for me and without the lower end.
Walnut has always been a bit dry for me.
EI rosewood - apparently can be lovely but always felt the mid-scoop and piercing trebles made it a touch shrill & empty-sounding.
My YouTube Channel
In detail, Blackwood really is very similar to Koa - and rather different too. You can immediately hear the similarity, but also the difference. It's a bit like meeting your wife's sister for the first time - so much about her is familiar, but there are things that stand out as different. Blackwood has been described as the "queen of Australian tonewoods" and I reckon that's fair enough. It is richer and bassier than maple, not cloying like rosewood, has a touch of mahogany warmth (not as much as Koa though) and is very versatile.
Walnut I can't comment on. (Wait until my Brook arrives next year. Yay!)
Well, I will comment anyway, but only on Black Walnut (the American one, which is a little bit softer than Common (European) Walnut but broadly similar) in combination with a cedar top. The two guitars I tried in that combination at Project Music blew me away. One Lowden, one McIlroy, both lovely. On the whole, I think the tonal richness and responsiveness had more to do with the builder's skills than with the walnut back; just the same, I was impressed.
Pete and I were also gobsmacked by the first Brook we tried there (an Englemann Spruce top, I think). We didn't recognise it as rosewood and assumed it was something else (walnut maybe). It looked different and sounded different. We liked it a lot. Had us bamboozled! But rosewood it was - very different to the second Brook they had, also in rosewood, which looked and sounded as expected.
And then (at the Brook workshop) I played Simon's Adiriondack (Red) Spruce and rosewood OM, which was different again - and which had me rethinking my mild dislike of Red Spruce as it was very playable and (unlike my Guild) not harsh at all.
I forgot to mention sustain when talking about woods. I think it's important. And different to overtones. I like sustain. Mahogany doesn't have many overtones (though it does have a lovely natural ring/thrum) it does sustain, as does sapele. Black siris not as much and I think the moon top partly affects that but the sound is good in other ways.
I love your description of Aussie blackwood and really want to try it as it sounds great!
Was the difference in the rosewoods just due to the tops or were they the exact same guitar? I think a European spruce with rosewood might be something really nice.
Never tried redwood. I think my brain is going to explode with the options lol
My YouTube Channel