Neutric right angle plug

hotpickups

Can some one help me get this plug apart? I'm trying to get the black plastic cover off and I can't see how it comes off

https://imgur.com/a/ZHEAl

Im hoping to learn a new trick (did you see what I did there )

ICBM

The black plastic piece slides, away from the cable.

hotpickups

Oh ICBM said:

The black plastic piece slides, away from the cable.

Oh no it doesn't I'm thinking I should be pushing down a tab somewhere ?

ICBM

My mistake, it's the metal ones which slide. The plastic one lifts at the end nearest the cable.

At least it does on the one I have here .

FelineGuitars

Does it have a metal part sticking through the end of the plastic at the top (where we can't see?)

if so the the part near the threaded bit lifts up , hinging on the aforementioned metal part

Paul_C

lift up the black plastic bit at the end nearest the threads first ?

mynamesnotbob

Get a pointy thing, point it in above the cable so it is touching the underside of that black cover, push the cover from inside - jobs a carrot, you are now holding a plug attached to a cable and the black cover is somewhere on the floor 

Roland

hotpickups said:

Oh ICBM said:

The black plastic piece slides, away from the cable.

Oh no it doesn't I'm thinking I should be pushing down a tab somewhere ?

The metal piece has two small 0.5mm studs which stick up into indentation in the plastic, preventing it sliding. Lift the cable end of the plastic with a knife blade and it will slide open.

hotpickups

Your right thanks guys. It lifted off st the thread  end

Thanks again 

Rocker

Get someone else to do it for you.

hotpickups

Rocker said:

Get someone else to do it for you.

Not half as fun though