It looks like you're new here. If you want to get involved, click one of these buttons!
Subscribe to our Patreon, and get image uploads with no ads on the site!
Base theme by DesignModo & ported to Powered by Vanilla by Chris Ireland, modified by the "theFB" team.
Comments
Don't talk politics and don't throw stones. Your royal highnesses.
Replaced the Fulltone 70 with a Suhr Rufus, the Belle Epoch with an Alexander Amnesia and went back to the Marshall reflector after trying a Digitech.
After the latest rebuild. Added a second M5 and moved everything on to an Innox PB06 (approx Pedaltrain Novo 32 / PT Pro size)
Guitar > buffered patchbay > Polytune mini > BYOC Divided Octave > BYOC 5 knob compressor > [M5 #1] > [M5 #2] > Zendrive clone > Screwdriver Deluxe clone > patchbay > Laney Lionheart > patchbay > [M5 #2] > Boss DD-500 (w/ Vein Tap Skinny Little Twins footswitch) > [M5 #1] > Mosky XP Booster > patchbay > amp.
The two pedals with the top mounted jacks at the back are order switchers- the M5s are in one of the two loops on each, which switch them between two positions in the signal chain. Dead useful for getting the most out of the M5s.
Currently running off three different power supplies (one each for the M5s, One Spot for everything else. M5s don't do daisy chaining), no MIDI link to the second M5, and needs a thorough tidy up underneath (missus), so not quite done yet.
Don't talk politics and don't throw stones. Your royal highnesses.
Thanks! All in series. The order switchers just control what the series is.
There's a buffer built in to the patchbay so not much in the way of capacitance and general "tone-suck".
The switchers, expression pedals and patchbay make it look like there's more going on than there is IMO- there's "only" nine pedals on the board.
Don't talk politics and don't throw stones. Your royal highnesses.
<a href="http://imgur.com/fiZ9wqq"><img src="http://i.imgur.com/fiZ9wqq.jpg" title="source: imgur.com" /></a>
I wasn't expecting much from the drives but they're actually very good!
I made this convertible board around the MS-3:
https://i.imgur.com/oSKD9xR.jpg
A couple of changes to the signal chain which work very well - fuzz into wah and tremolo after delay.
Wah g'wan? Image no worky, photobucket nor imgur...ah well...