It looks like you're new here. If you want to get involved, click one of these buttons!
Subscribe to our Patreon, and get image uploads with no ads on the site!
Base theme by DesignModo & ported to Powered by Vanilla by Chris Ireland, modified by the "theFB" team.
Comments
I'll shortly be adding my RYRA Klone and possibly the Fairfield comp to the sales thread, and I may finally splash out on a tuner, though the H9's tuner is fine enough for the moment.
https://imgur.com/gallery/TMc9Z
Got MIDI? Even dirt simple stuff like sync to MIDI clock would be dead useful for a rig like that.
Don't talk politics and don't throw stones. Your royal highnesses.
My pedal board is home made, and used to be twice the size - but after six months of no additional pedals I just chopped off the other end. Right to left, starting bottom right:
TUNER: Polytune Mini 2 (set to Eb standard because I sold all my other guitars with pleb tuning)
COMPRESSOR: Mooer Yellow Comp (which was really for my Tele when I had it, but makes my cleans sound neat and play more fluidly). This spot is going to alternate with the Mooer Black Secret Rat-clone I've got on the way.
OVERDRIVE: Klon clone for my drive. After dropping all my distortion pedals I decided to go for a drive, and this thing crisps up the Les Paul something perfect.
CHANNEL SWITCH: to flip between clean/dirty on my amp
POWER: MXR Iso Brick. I was absolutely convinced that the hiss in my amp was because of noise, it wasn't, it's because there's a certain noise floor on the amp which never really gets any louder but wasn't there on my solid state amp.
DELAY: I tried the TC Flashback and spent all the time on analogue delay. I tried the Seymour Duncan Vapour trail and found the see-saw modulation to be a bit much. I settled on the Boss DM-2w and I'm super happy. To be honest I probably use it less than I should, because i'm trying to work on my rhythm chops at the moment - but it's just lovely.
REVERB: Catalinbread Talisman - All the amps I've ever owned have had on-board reverb and playing my current totally dry was very uncomfortable. I have it set very low - all knobs around 10am - and it just creates a very smooth wash.
I've also tried to fit a Fuzz (just can't find a use for it), Phaser (I turn it on, play a phrase and then turn it off), Chorus (ditto), Flanger (yep) and nothing really stuck. I tried a Looper (TC Ditto and TC Flashback 3) - I'm terrible at looping, and a Trio+ (which needed to sit in the FX loop and was wholly unsuited there).
Agreed on the Klon/LP combination. Match made in heaven.
What's the amp you're running through?
Just added a Mooer e-lady flanger. Well you can’t have too much modulation!
Homemade Ikea Hejne board going into a Roland JC-40 at the moment.
https://www.dropbox.com/s/kuuru8w6tz4xmoy/pedalboard.jpg?raw=1
https://imgur.com/a/KmZtk
that looks so much better Gav, great job
I don't have any experience of them myself, but @GavRichList, @Wazmeister and @ThorpyFX among others seem very excited about the Morningstar MC6. Small and very versatile from the looks of it.
I think you're right about incorporating the Brothers in a MIDI setup being a little more complex, but it's still do-able.
Don't talk politics and don't throw stones. Your royal highnesses.
Grae, MC6 full stop. Simple. Amazing.