›

Looking for dual concentric 250/500k vol pot

What's Hot
JMP220478JMP220478 Frets: 421
in Guitar
Looking for Fender part no 099-0847-000 or CTS or equivalent for HSS setup on an MM Silhouette ie just vol n tone . 
Current JB HB bridge pu  really hasnt worked out despite being allegedly 250k pot friendly .. 
only stockists seem to be US .. 
my trading feedback - http://www.thefretboard.co.uk/discussion/57774/jmp220478#latest
0reaction image LOL 0reaction image Wow! 0reaction image Wisdom

Comments

  • ICBMICBM Frets: 72368
    Use a 500K pot and a 470K resistor to simulate a 250K when it's on the single coil settings.

    "Take these three items, some WD-40, a vise grip, and a roll of duct tape. Any man worth his salt can fix almost any problem with this stuff alone." - Walt Kowalski

    "Only two things are infinite - the universe, and human stupidity. And I'm not sure about the universe." - Albert Einstein

    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
  • JMP220478JMP220478 Frets: 421
    ICBM said:
    Use a 500K pot and a 470K resistor to simulate a 250K when it's on the single coil settings.
    @icbm - is there a website with a diagram n how does this work with split coil position 2 ? 
    my trading feedback - http://www.thefretboard.co.uk/discussion/57774/jmp220478#latest
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
  • Winny_PoohWinny_Pooh Frets: 7771
    edited August 2019
    I have a new unused one.

    https://www.thefretboard.co.uk/discussion/159459/new-unused-strat-superswitch-dual-concentric-pot-humbucker-mounting-screws#latest
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
  • JMP220478JMP220478 Frets: 421
    @Winny_Pooh - whats the part no - as I think that might be the “jazz” bass pot ? 
    my trading feedback - http://www.thefretboard.co.uk/discussion/57774/jmp220478#latest
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
  • Winny_PoohWinny_Pooh Frets: 7771
    Says PN 019268049
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
  • ICBMICBM Frets: 72368
    JMP220478 said:

    @icbm - is there a website with a diagram n how does this work with split coil position 2 ? 
    Is the coil split done with the pickup selector switch? That makes things a bit more tricky - but then you can't use it to select volume pot values either.

    "Take these three items, some WD-40, a vise grip, and a roll of duct tape. Any man worth his salt can fix almost any problem with this stuff alone." - Walt Kowalski

    "Only two things are infinite - the universe, and human stupidity. And I'm not sure about the universe." - Albert Einstein

    0reaction image LOL 0reaction image Wow! 1reaction image Wisdom
  • JMP220478JMP220478 Frets: 421
    Split coil on pu selector - trying to mimic myshawbucker std strat setup on a silo 
    my trading feedback - http://www.thefretboard.co.uk/discussion/57774/jmp220478#latest
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
  • ICBMICBM Frets: 72368
    JMP220478 said:
    Split coil on pu selector - trying to mimic myshawbucker std strat setup on a silo 
    In that case you can't use a dual-gang pot either, since there will be no means of switching them. You're going to need a Superswitch.

    "Take these three items, some WD-40, a vise grip, and a roll of duct tape. Any man worth his salt can fix almost any problem with this stuff alone." - Walt Kowalski

    "Only two things are infinite - the universe, and human stupidity. And I'm not sure about the universe." - Albert Einstein

    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
  • JMP220478JMP220478 Frets: 421
    http://www.fmicassets.com/Damroot/Original/10001/Fender%20Am%20Std%20Stratocaster%20HSS%20Shawbucker%20011311XXXX%20Service%20Manual.pdf  

    looks like postion 2 isn’t split after all on the shawbucker wiring  - though JB is clearly a pu with more output than std shawbucker pu
    my trading feedback - http://www.thefretboard.co.uk/discussion/57774/jmp220478#latest
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
  • ICBMICBM Frets: 72368
    JMP220478 said:

    looks like postion 2 isn’t split after all on the shawbucker wiring  - though JB is clearly a pu with more output than std shawbucker pu
    No, but it does use a Superswitch.

    If you don't want to split the pickup then it's easy to do with a standard 5-way and the resistor.

    Or you could try changing the tone control to 500K first and see if that's enough.

    "Take these three items, some WD-40, a vise grip, and a roll of duct tape. Any man worth his salt can fix almost any problem with this stuff alone." - Walt Kowalski

    "Only two things are infinite - the universe, and human stupidity. And I'm not sure about the universe." - Albert Einstein

    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom
Sign In or Register to comment.