It looks like you're new here. If you want to get involved, click one of these buttons!
Subscribe to our Patreon, and get image uploads with no ads on the site!
Base theme by DesignModo & ported to Powered by Vanilla by Chris Ireland, modified by the "theFB" team.
Comments
Do you have the tools and confidence to ream those holes to a wider diameter?
Chances are, a set of replica Kluson safety tuners would fit without major modification. If the stock 'heads are fastened with either rear-facing pegs or a locator lug and screw, these holes may be left visible after the upgrade.
If you want to replace them though, any 6-in-line 135° keys* such as these Gotohs should fit.
https://www.allparts.uk.com/products/tuning-key-mini-6-in-line-gotoh
* 135° is the angle of the fixing screw
At least 95% of all tuning problems are caused by things other than the machineheads, and when you've already got proper diecast/threaded-collar ones, probably at least 99%.
"Take these three items, some WD-40, a vise grip, and a roll of duct tape. Any man worth his salt can fix almost any problem with this stuff alone." - Walt Kowalski
"Only two things are infinite - the universe, and human stupidity. And I'm not sure about the universe." - Albert Einstein
http://www.axetec.co.uk/guitar_parts_uk_037.htm
the MH606