It looks like you're new here. If you want to get involved, click one of these buttons!
Subscribe to our Patreon, and get image uploads with no ads on the site!
Base theme by DesignModo & ported to Powered by Vanilla by Chris Ireland, modified by the "theFB" team.
Comments
If not get yourself a hardened drill bit and a tap for the thread pitch of the trem arm you want to use and have at it.
For the uninitiated, Easy Out is a brand name for an extractor tool. Every good home should have a set of them … including mine!
Measured the block and it comes up as
73mm length
E to E hole 38mm
Height 38mm.
Not sure if this is a standard size as it's seems a bit shorter (in height) than the other trem blocks I have.
It is in the ballpark for the three sustain block fastening screw holes.
Ive been looking online but struggling as the shorter blocks seem to be designed to work with the chinses squier bullets which have the shallower body but different string spacing.
A lot of things he knows sizes of, something unusual might be best posted to him but he'll say. I've had at least four blocks & some arms from him, all as good as much more expensive ones.
Massive improvement over the original and fits perfectly.
Highly recommended to anyone who is after a upgrade trem block with a super fast no hassle service, I would have been loss without him due to the unusual size .