It looks like you're new here. If you want to get involved, click one of these buttons!
Subscribe to our Patreon, and get image uploads with no ads on the site!
Base theme by DesignModo & ported to Powered by Vanilla by Chris Ireland, modified by the "theFB" team.
Comments
I also fitted the pickups in order to check the alignment, and also to give an idea of the final weight and balance of the guitar. One thing I can say is this is going to be a very light-weight guitar, perhaps the cutaway on the base is partly responsible for that, but also I think www.guitarbuild.co.uk have used some very low density swamp ash to make my body from.
The pole piece spacing for the neck pickup is a bit wider than ideal, but I suspect in practice it won't be an issue:
I will be using 11-48 gauge strings, so I fitted a high and low E, and set the intonation just to check that the bridge is in the right place, and it's good! (Phil at Guitarbuild sorted that out for me, cheer for that Phil! ):
Some work getting the holes for the strap pegs drilled and the pegs fitted. There is one each side on the base like this:
And then some experimenting before I decided where to place the peg on the upper horn, in the end I went for this position, which works with the fairly high position I like for a guitar on a strap, and doesn't pull the upper edge of the guitar inwards too much, which I don't like. There is no trace of neck heaviness either, great, because that was a bit of a concern given the lightweight body, plus it's shape.
And then it was basically time to dismantle it all again, so I can get on with the finishing. I'm trying a colourless, satin top coat Wudtone kit for this guitar, having used Tru Oil previously on other builds. At the moment it's hard to say what the difference will be, but the Wudtone is certainly quite easy to use. After sanding the body smooth with 600 grit, then cleaning it by wiping with naphtha (zippo lighter fuel), I applied a fairly liberal coat of Wudtone base coat - as expected this soaked into the grain quite a bit. I've since sanded smooth again with 600 grit, although it's not like going back to bare wood, since the finish has impregnated into the wood a bit. Then applied a second, very thin coat of Wudtone - really as thin as I could, and still be able to tell I'd done something. My intention at the moment is to go for a pretty thin finish, just enough to get things looking nice and protect the wood - kind of a natural look if you like. As Wes predicted, there is some colour change happening, which I guess is unavoidable, but the grain is being brought out nicely, and I think I will be able to get a good result. Really bad light today, so the following shots don't really show what the body looks like to the naked eye, but I think you can at least see that the grain stands out more, and that there is a slight sheen to the wood:
I've also started work on finishing the headstock front - the maple has been smoothed with 1000 grit paper, and I've so far applied just one coat of Plasti-kote clear satin acrylic spray. I think it's going to be a case of building up in thin coats, with fine sanding between, until I have a good smooth surface on which to apply a decal logo. Then more coats on top of that.
I forgot to mask off the truss rod cavity in that pic, oops, will mask that off before doing another coat!
Cheers Jalapeno - I admit I chose those machine heads mainly because I think they look cool lol, but they do work very well too.
Cheers for taking an interest, hope it provides a bit of entertainment!
Just to update again - I've carried on doing further work on the guitar finish, and this morning gave the body a rub down with 0000 wire wool, cleaned with naphtha, and applied a third coat of the clear Wudtone base. After a few hours it was dry enough to handle with care, so I've taken a few pics - I actually think it's already looking good enough that I could stop now if I wanted, however, I will carry on and at least do one layer of the satin top coat, which I understand also helps to provide a tougher protective surface. The wood colour has changed somewhat, but I would say the overall appearance is lighter and less tinted than I would have achieved with Tru Oil. Overall, I'm pretty impressed with the Wudtone kit - good stuff!
I've not heard anyone diss the Wudtone yet so almost definitely going down that route. I've got a trans black idea in my head but your 'natural' finish looks gorgeous so I'm in two minds now as I've got a great piece of ash for my body too.
Trading feedback: Previous (+18) and Current
lol - cheers! That's just with the three base coats on as well - still watching the satin top coat curing, looks like it's going to stay pretty much in the same ballpark, i.e. more of a glossy satin sheen than anything. I've seen some satin finishes which are a lot closer to a matt, but glad it's not like that, nice to have a bit of reflection going on to highlight the curves. I've had not dissimilar results with Tru Oil, in fact I did an ash tele:
...used some dark grain filler on that one. But if anything I think I'm preferring the Wudtone - it's quicker for one thing, and the results seem at least as good.