Who are we liking for paddle-headstock necks in the UK?
I’ve got an Allparts JGRO (Jaguar, 24”) on a previous build, but it’s a little too fat for my next project, so I’m looking for some recommendations. I’d also prefer a paddle so I can shape my own headstock, rather than the Fender-style.
24”, rosewood board, thin profile… roasted maple shaft would be nice but not essential, I’m happy to blast it with a torch and sand it back, before oiling it for that aesthetic!
Guitarbuild.co.uk look decent, but it works out fairly expensive in the end, close to £400.
I’m aiming for the £200 ballpark.
Comments
https://guitaranatomy.com/product/roasted-maple-and-rosewood-stratocaster-guitar-neck-unfinished-paddle-headstock/
Please don't blow torch the neck for a roasted aesthetic. It's not a good idea on a neck.
Instagram
• Youtube - https://www.youtube.com/@Goldeneraguitars
Check out there eBay shop and contact them for necks.
https://www.ebay.co.uk/itm/296147969031?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=spJqi0YJR5G&sssrc=4429486&ssuid=l_4TSel6QX6&var=&widget_ver=artemis&media=COPY
A blowtorch will over dry the surface and potentially release some unforseen tension or introduce some from the difference between surface and internal humidity.... In short, you could warp it very easily, or cause splits at points of tension
Instagram