It looks like you're new here. If you want to get involved, click one of these buttons!
Subscribe to our Patreon, and get image uploads with no ads on the site!
Base theme by DesignModo & ported to Powered by Vanilla by Chris Ireland, modified by the "theFB" team.
Comments
• Youtube - https://www.youtube.com/@Goldeneraguitars
• Youtube - https://www.youtube.com/@Goldeneraguitars
The 80 grit was too light for the work. 40 would've done the trick. I had to keep scraping off the accumulated dried glue from the discs. In the end I got Makita branded ones. The 80 and 120 did the trick in the end. I'm not quite sure what application 240 or 320 grit could be. Perhaps on guitar necks?
https://www.screwfix.com/p/makita-bo5041-2-125mm-electric-random-orbit-sander-240v/48638
I great bit of kit, discs are not cheap though, and cheap discs are not any good!
It deals with most things really well.
it went from this (glue)
To this in no time.
I usually hand sand afterwards to round off rounded bits and get nice and smooth.