It looks like you're new here. If you want to get involved, click one of these buttons!
Subscribe to our Patreon, and get image uploads with no ads on the site!
Base theme by DesignModo & ported to Powered by Vanilla by Chris Ireland, modified by the "theFB" team.
Comments
However, I currently own one and have owned and played many that are fine and without fault.
This would possibly be expected if they were a budget brand but they're not even a normal priced brand, they are a very expensive brand.
I have a Memphis VOS 335, the bone nut was so soft the string windings were leaving indentations in the grooves and binding. It crumbled when removed. Also came from the factory with a deep dink in the finish by one of the F holes
I had an R8 that needed a finish repair by the nut, it had been chipped off in the factory
All of these guitars have razor marks on the binding. All retailed for over 3 grand. It doesn't change the way they sound or play, but it is a bit insulting to the consumer
On a scale of 1 to Gibson I would put the Eastman flaw quite near the bottom